Go Back   2021-2022 StudyChaCha > StudyChaCha Discussion Forum > General Topics

  #1  
Old May 24th, 2014, 03:34 PM
Sashwat's Avatar
Super Moderator
 
Join Date: Jun 2011
Default

I want to apply for the job in NCR and for that I need to get the NCR Placement previous years question papers so can you provide me that?

As you want to get the NCR Placement previous years question papers so here is the information of the same for you:

1)rms value of AC current is equal to main current at an angle ?

a) 60 b) 45 c) 30 d) 90

2)Corona produce in two transmission line if ?

a) Whn both placed closed b) Whn both placed widely

c) Potential difference is very highd) I did’t remembered

3)Diac is equall to ?

a) Two diode and two resister b) Trice with two gate

c) Two thyristor connect in antiparallel d)Four layer pnpn scr

4)In the Economic transmission point of view Kelvin,s gives ?

A) Voltage drop at feeder b) transmission losses

Two more option I did’t remember.

5)The essential condition for using servomotor for high torque at all?

a) load b) speed

c) voltage d) power

6)If torque of induction motor is 200n-m at slip 12%. Wht is the value of torque at slip 6%.....?

a)60n-m b) 40

c) 100 n-m d) 150

7)If speed of induction motor at full load is 950rpm then wht is the speed at half load ?

a) 1000 rpmb) 975

8)Find the value of ∫│cost +1/2│dt where limit is 0 to ∏/2?

9) Wht is the slope of –x3+ 6x2+ 2x+1=0?


10) For the purpose of constant speed we use?

a) Brushless dc motor b) stepper motor

c) shaded pole motor d) sync motor

11) Essential condition for parallel operation of 1phase transformer?

a) Rating b) Polarity

c) Impedance d) Voltage

12) Some of G.K. question

13) Who did give the name of AL?

14) World literacy day?

15) World environment day?

16) If two heaters of 100W & 110 volt other are 150W & 110 volt connect in series with 220v ac source then what is the total power?

17) What is the GDP rate of India in 2005-06?

18) What is the % rate of production of AL in India?

a) 10b) 20

c) 7 d) 14

19) One passes which have 4Qs

20) Some fill in blanks

21) One Q about the find the % of fifth harmonics in a current wave equation.

22) 4pole 3phase 50 htz induction motor running at 1460 rpm. Wht is the speed of running slip wrt to rotor?

23) Find the new kva rating of transformer which hav 220 kva, 1watt iron loss and 2watt cu loss?

24) Hay’s bridge used for the measurement of?

25) In R-L-C parallel resonant circuit

a) Impedance is max. b) resistance is min

two more options I did’t remember

26) Two bulb 100w & 50w respectively with constant resistances connect in series with 220v dc source then wht is the value of voltage across first bulb?

27) AC ammeter used for measurement in

a) Pmmc b) induction meter

c) Dynamometer d) moving iron type meter

28) For ac current we use?

Same option

29) we preferred V-V connection over T-T connection why?

30) Suspension type insulator is used whn?

a) high voltage b) low voltage

c) oscillating voltage d) steady voltage

31) One question based on Norton’s theorem?

32) One question based on inverted-V curve of synch motor.

33) one question based on load saturation curve.

34) There were 4 question like if A*B represent A is the son of B, some like that

35) Some questions from BAR-GRAPHS

36) Some questions from probability.

37) Some questions from Data–interpretation

38) Some questions from diodes.

39) One question from winding design for motor (find value of commutator segment)

Last edited by Gunjan; July 5th, 2019 at 09:33 AM.
Reply With Quote
Other Discussions related to this topic
Thread
BEL Placement Exam Previous Years Question Papers
Infosys placement question papers of previous years
EasyTech placement previous years question papers
Polaris placement previous years question papers PDF format
Mphasis placement previous years question papers
WIPRO placement question papers of previous years
3i InfoTech placement previous years question papers
Kanbay Placement Exam Previous Years Question Papers
Flextronics placement previous years question papers
HCL placement question papers of previous years
AMI Placement Exam Previous Years Question Papers
Quark placement previous years question papers
Mascot Placement Exam Previous Years Question Papers
NALCO Placement Exam Previous Years Question Papers
Google placement previous years question papers
Aricent placement previous years question papers
Honeywell placement previous years question papers
OnMobile placement previous years question papers
TCS placement previous years question papers
Integra Previous Years Question Papers of Placement






  #2  
Old January 9th, 2015, 10:02 AM
Super Moderator
 
Join Date: Apr 2013
Default Re: NCR Placement previous years question papers

The NCR is a major IT based company in the nation and recruits different eligible candidates from different Institutions across the nation. The recruitment process has two stages. These are as follows:


Written test
Technical and HR interview


You are asking for the NCR Placement previous years question papers. Here I am uploading a file that contains the NCR Placement previous years question papers. Here I am also provide you some content of the file. This is as follows:

Why do we use steel in Column? Why HYSD bar is preferable than plain bar?
What is security testing? How to test the web application using security testing ?
what is the use of starter in tube light?and what it contains
Why do we need different environments and different data? What is the other name
for environment? Justify your explanation ? real time experts pls xplain?
What is TDS
what is repo rate?
what is the difference between web application and client server application testing ?
What is the need of filtering ideal response of filters and actual response of filters

NCR Placement previous years question papers detail to atteched pdf file..............
Attached Files Available for Download
File Type: pdf NCR Placement previous years question papers1.pdf (348.6 KB, 25 views)
File Type: pdf NCR Placement previous years question papers2.pdf (348.6 KB, 21 views)
__________________
Answered By StudyChaCha Member
Reply With Quote
Reply


Tags
Job Placement

Reply to this Question / Ask Another Question
Your Username: Click here to log in

Message:
Options



All times are GMT +6.5. The time now is 05:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0 PL2

1 2 3 4 5 6 7 8