HAL syllabus

I have applied for the HAL assistant engineer exam so I want syllabus of the exam. Can you provide me the complete syllabus or such any website from where I can get the syllabus?

As you did not specify the name of IIM so here I am providing you the name of the courses offered by IIM Bangalore.

Post-Graduate Programme in Management (PGP)
Post Graduate Programme in Software Enterprise Management (PGSEM)
Post Graduate Programme in Public Policy Management (PGPPM)
Executive Post Graduate Programme in Management (EPGP)
Fellow Programme in Management (FPM)
Executive Education Programme (EEP)

Admission process for 2012 has been started. So please specify the name of the program for which you want to get the information regarding to admission.

Further If you want to get the course information about another IIM then please specify the name of the IIM so that I can provide you the information.

I am going to sit in HAL Written test for Diploma Trainees‎ but I don’t have full syllabus of the exam. Can you give me topic wise syllabus of the exam? If yes, please give me soon so that I can start my preparation.

The HAL carries these subjects for the written test:

Aeronautical ,Mechanical and Production
Metallurgy, Electrical and Electronics
Computer Science
General Awareness
General Engineering
It has 160 questions

__________________
Answered By StudyChaCha Member

LOOK IT IS SAME AS SYLLABUS FOR GATE 2014.BUT IN ADDITION TO THAT THEY WILL TEST YOUR APTITUDE SKILLS.ANY HOW IF U HAVE TO QUALIFY U SHOULD HAVE THROUGH FUNDEMENTAL KNOWLEDGE IN YOUR CORE SUBJECT WITH OUT ANY MISCONCEPTION AND ENGINEERING MATHEMATICS

You need the Hindustan Aeronautics Limited (HAL) Management Trainee exam syllabus, i am providing here:

HAL MT:

Eligibility:
The applicant should have Bachelor’s Degree in Engineering / Technology (Full Time) (4 years after 10 +2) in the Branches of Aeronautical / Computer Science / Electrical / Electronics / Mechanical / Metallurgy / Production.

Paper pattern:



Syllabus;


HAL MT Paper Wise Syllabus Details
As shown in above table the Online Paper will be spliced into 3 Part- Part I- GA, Part II English and Part-III is Related Discipline. Details are as follow:

General Awareness: This section of the paper will ask you questions related to latest happenings, current affairs of India and Aeronautic Industry, Major International and Nation Issues related questions, Social and Cultural GK, Economy and General Science etc.

Reasoning and English Section: This part of paper as the section name says will be all about English related MCQs and Reasoning questions, basically this part is focused upon Grammar, Sentence Improvement, substitution (one word), Analogy, words recognition and matching, Antonym, synonyms, comprehensive English, Idiom and Phrases, Error recognition and solving etc. Apart from this Paper will include some part of reasoning related questions that basically comes in competitive exams.

Syllabus for HAL MT Engineering Trades:
Part III syllabus for HAL MT Engineering Discipline: This section will have questions related to your specialization, as the Paper is MCQ based so the candidates appearing for the HAL MT exam are advised to study the basics of your specialization books. The standard of paper is made on graduate level so it is delimited with your recent study book syllabus. Below we have share some best objective guide books for HAL MT Engineering Discipline.

Part III Syllabus for HAL MT Human Resource: As said for the Engineering part the same rule applied here in this section, the paper will reflect questions from you’re the specialization subject that is HR, as the profile basically focused on the legal and Industrial relation so it is advised that to study Labour Law and Industrial relations. Consider buying the Objective Human Resource book that we have recommended for the HAL MT Exam preparation.

1. partial differntiation of x^3*y^3/(x+y)^3

2. some points like (0,2,4), (2,5,-1) and (6,2,0) were given and were asked to find whether it is parabola, ecllipse, carboid or cycloid.

3. there were so mant conversion questions like binary to decimal, decimal to binary, decimal to oct, binary mulitiplicationsetc.

4. some laplace formulae related to sine and cosine terms.

5. fouries series of quarter symmetry

6. by appling rouths hurwits criterien we were suppose to find the nuber of roots the equation was something like 2s^4+s^3+4s^2+s i think so

7. damping is proportional to gain, sqrtof gain, 1/gain or 1/sqrt of gain

8. vocabulary like germs:diesease::, emulate:mimic::,

9. there questions about power plants like which plant correspondes to highest capital cost, highest running cost,lowest operational cost, efficiency of thermal plant etc

10. what is the present capacity of unit generation 200MW, 210 MW, 375MW or 500 MW

11. where in nuclear power plant is located like kota, talcher, kolghat,

12. there was 1 question realed to idduki, ramagundam power plants i dont know whether it is the odd 1 out of the hydro plants

13. there was 1 repeated questions related to the spacing b/w the phase conductors like 11m, 8m, 20m, 24m.

14. is megger related to hot wire instrument, moving coil or moving iron.

15. 1 question related to load factor.

16. in a two w/m method what is the condition for which both the w/ms are equal and opposite.

17. question based on inverter gate

18. question related to maximum overshoot.

19. 2 or 3 questions were related to step input, impulse i/p etc.

20. 1 question related to boolean algebra

21. some question related to find the value of lambda to get no solution.

22. 1 question was related to find from the options of nquist criteria, bode plot, routh hurwits,

23. question related to expontial rise and fall of inductor.

24. given 2 poles and 50 hz freq to find the syn speed.

25. question based on inertia constant and p.u. values

26. quetion baed on power transfer capacity and voltage

27. SIL of 400 KV lines

28. 2 quetions based on maximum power transfer capacity from circuit theory.

29. apttitude ques of pipes and cisterns, compound interest, time and distance, cubes, hcf and lcm, multiplication,

30. for how many days there will food if 2 persons are supposed to leave. question related to this were asked.

31. questions related to angles i dont remember the quetions i remember only the options like pi/3, pi/6,pi/4. 1, -1, 1/2 1/sqrt2. etc

32. ouestion based on P&V, P&Q, V&delta.

33. how many HVDC links are presently in use in india.

34. there were 4 questions like if A*B represents Ais the son of B, C/D represents Cis the husband of D then how A and D are related.

35. to sort the odd number out from a box of given numbers.

36. Vrms and Vo of full wave rectifier

37. reflection coefficent of current of an open ended line.

Mostly they gave questions from these subjects
1. DC Mechines(about 50)
2. Networks (20)
3. Instruments (5)
4. Digital Electronics (30)
5. EDC & analog electronics (8)
6. Control systems (2)
7. Antenas, Satillite commincation (5)
8. Communications (10)

The paper is very hard i didnt expect they will give question patern like this so plz concentrate more on mechines
some of questions i feel easy and i remember are
1.what is weight of 5 rupee coin??
2.who is never a cheif justice of india ?
3.what is largest ISRO company in india?
4.which player took 10 wikts in one test innings ?
(in the list anil kumble not given)

Techinical que's:

1.binary number for 1001.1101?

2.decimal number for 19?

3.excess-3 code for 29?

4.speed-torque characterictics of dc motor? (some figures given)

5.quantization noise occurs in??(repeated question 2 times given)

6.schering brige method used for measuring of??

7.prom based on networks are very very easy every body can ans...like calculate curent in one resistor if resistors are connected in parall like that

8.if speed doubles, distance increases what is the torque in dc motor?

9.what is the value of A'+1 ?

10.what is instrument used in MIC instrument?
a)galvonometer b)ammeter like that....

11.question about dammping concept in PMMC

12.what is PAL full form??

13.what is the use for sweeping resistor in transistor??

14.quetion based on bootstraping concept.

15.rms current in half wave rectifier?

16.what is form factor?(some ratios are given)

17.prob on tree branches concept

18.range of radio telemetry...some frequencies given


Here is the attachment of the HAL MT syllabus:

Attached Files Available for Download

HAL MT Syllabus.zip (126.9 KB, 17 views)