RRB Chennai Exams Pattern

Will you please give me the RRB Chennai Exams question papers of the Asst. Loco Pilot General Awareness, according to the Pattern…?

As per your requirement here I am giving the RRB Chennai Exams question papers of the Asst. Loco Pilot General Awareness, according to the Pattern:

1) Who composed National Song of India?
a) Rabindranath Tagore b) Bankim Chandra Chatterjee
c) Sri Aurobindo d) Mahatma Gandhi

2) The first Field Marshal of India was
a) A. Vaidya b) K.M. Cariappa
c) Sunder Ji d) SHFJ Manekshaw

3) Which is the first month of our National Calender?
a) Bhadra b) Phalguna c) Chaitra d) Asadha

4) Who was the first women judge of Supreme Court of India?
a) Miss Liela Seth b) Miss M. Fathima Bibi
c) Miss Anna Chandi d) Anna George Malhotra

5) Salar Jung Museum is located at
a) Hyderabad b) New Delhi
c) Pune d) Allahabad

6) Samadhi of Lal Bahadur Shastri is
a) Shantivana b) Shakti Sthal
c) Rajghat d) Vijay Ghat

7) Which one of the following Indian Banks is not nationalised Bank?
a) Corporation Bank b) Dena Bank
c) Federal Bank d) Vijaya Bank

8) Which one of the following countries is the leading producer of uranium?
a) United States of America b) Canada
c) Germany d) Zambia

9) Who among the following wrote 'The Communist Manifesto' along with Karl Marx?
a) Emile Durkheim b) Friedrich Engeles
c) Robert Owen d) Max Weber

10) At which one of the following places did Mahatma Gandhi first start his Stayagraha?
a) Ahmedabad b) Bardoli
c) Champaran d) Kheda

Answers: 1-b, 2-d, 3-c, 4 -b, 5-a, 6-d, 7-c, 8-b, 9-b, 10-b.

__________________
Answered By StudyChaCha Member

Railway recruitment Board, Chennai conducts examination form the post of Junior Engineer and Senior Section Engineer.

Exam pattern:

The Question paper contains 150 questions. The 90 questions will be form Technical Ability & General Science and 60 questions from General Awareness, Arithmetic, General Intelligence and Reasoning.

The exam duration is 90 minutes.

There is negative marking, the each wrong answer reduced 1/3 marks.

Following are the topics for the questions.

General Awareness
Arithmetic
General intelligence and Reasoning
General Science
Technical Ability

Here, I am giving you model paper for the exam.

1. A parabolic curve introduced between straight and a circular curve or between two branches of a compound curve
for ease, comfort and safety of movement of trains on curve is called:
(a) Spur curve (b) Transition curve
(c) Summit curve (d) Valley curve
Ans : B
2. The staggered rails joints are usually provided on:
(a) Bridge (b) Curves (c) Branching (d) Tangents
Ans : B
3. The track capacity can be increased by:
(a) Faster movement of trains on the track
(b) By using more powerful engines
(c) All the above
(d) None of the above
Ans : C
4. The railway station at which a track line meets a main line is called:
(a) terminal station (b) flag station
(c) way side station (d) junction station
Ans : D
5. The limiting value of super elevation of board gauge in Indian Railways is:
(a) 16.50 cm (b) 30 cm (c) 15 cm (d) 10 cm
Ans : A
6. The chart used for recording the condition of track is known as:
(a) Rolling chart (b) Track chart
(c) Hallade chart (d) Vibro chart
Ans: C
7. The most common system of signaling in India is the ...... system.
(a) automatic block (b) section clear system
(c) absolute block (d) pilot guard system
Ans : C
8. The feeder gauge .... is commonly used for feeding raw materials to big Government manufacturing concerns as
well as to private factories such as steel plants, oil refineries, sugar factories etc.
(a) 0.6096 m (b) 0.792 m (c) 1m (d) 1.676 m
Ans : A
9. Which one of the following bolts is not used in rail track:
(a) Fang bolt (b) Eye bolt (c) Rag bolt (d) Fish bolt
Ans : B
10. The gradient which requires one or more additional locomotive for hauling the load over the gradient is called:
(a) Up-gradient (b) Pusher gradient
(c) Steep gradient (d) Momentum gradient
Ans : B
11. Points and crossings are provided for change of ....on permanent ways.
(a) gauge (b) direction and gradient
(c) direction (d) gradient
Ans : C

12. In locomotive ‘hunting’ is:
(a) Movement of locomotive in vertical plane perpendicular to its movement along the track
(b) Sinuous path taken by engine as against the alignment of the track
(c) Motion after brakes have been applied
(d) Combination of A and B above
Ans : D
13. The rails which get battered due to action of wheels over the end of the rails are called:
(a) Hogged rails (b) Roaring rails
(c) Creep rails (d) Bucking rails
Ans : A
14. In broad gauge, the clear horizontal distance between the inner faces of two parallel rails forming the track is:
(a) 1 m (b) 1.676 m (c) 0.6096 m (d) 0.792 m
Ans : B
15. As per Indian standard, the recommended width of ballast section at foot level of rails for broad gauge tracks
should be:
(a) 4.38 m (b) 3.35 m (c) 1.83 m (d) 2.25 m
Ans : B
16. The minimum length of a passenger platform for broad gauge railway should not be less than:
(a) 305 m (b) 183 m (c) 495 m (d) 250 m
Ans : A
17. Generally the shape of fish plate is:
(a) elliptical (b) bone shaped (c) circular (d) rectangular
Ans : B
18. For wooden sleepers, size of the ballast should be:
(a) 2.54 cm (b) 10.16 cm (c) 3.8 cm (d) 5.1 cm
Ans : C
69. The length of track under the control of a Ganger is:
(a) 10 to 15 Km (b) 5 to 6 KM
(c) 3 to 5 KM (d) 1 to 2 KM
Ans : B
20. The maximum rising gradient which is provided keeping the power of locomotive in view, is called
(a) Momentum gradient (b) Pusher gradient
(c) Down gradient (d) Ruling gradient
Ans : D
21. The latest system of signaling introduced is:
(a) C.T.C. system (b) pilot guard system
(c) section clear system (d) automatic block system
Ans : A
22. Detonating signals are used:
(a) for noisy engines
(b) during foggy and cloudy weather
(c) for deaf drivers
(d) not now, were in use in nineteenth century only
Ans : B

23. The number of fish bolts used for joining the rails with the help of fish plates, is generally:
(a) 4 (b) 8 (c) 2 (d) 6
Ans : A
24. The Railways provided underground at a depth of about 18 m or more are called:
(a) Mono railway (b) Underground railway
(c) Railway (d) Tube railway
Ans : D
25. The art of providing an outward slope of .... to the treads of wheels of rolling stock is known as coning of wheels.
(a) 1 in 30 (b) 1 in 10 (c) 1 in 4 (d) 1 in 20
Ans : D
26. The process of connecting a track length by an electric circuit is known as track circuiting and the sleepers which
are suitable for it are:
(a) cast iron sleepers (b) steel sleepers
(c) wooden sleepers (d) all above are suitable
Ans : C
27. The movable tapered end of the tongue rail is known as:
(a) heel of switch (b) toe of switch
(c) stretcher bar (d) throw of switch
Ans : B
28. The yard where trains and other loads are received, sorted out, trains formed and dispatched onwards are known
as:
(a) locomotive yard (b) goods yard
(c) marshalling yard (d) station yard
Ans : C
29. Wider gauge permits:
(a) sleeper gradients (b) low axle load
(c) higher operating speeds (d) sharp curves
Ans : C
30. Which one of the following is expected to have shorter life?
(a) Steam engine (b) Diesel engine
(c) Electric engine (d) Shunting engine
And : B
31. The movable end of the tapered rail, by means of which the flanged wheels of the train are diverted from one track
to another is known as:
(a) Toe (b) Stud (c) Heel (d) Flare
Ans : A
32. The creep in rails is measured in:
(a) cm/kg (b) cm (c) Kg/cm (d) kg cm
Ans : B
33. When a rail loses its weight by 5%, it should be renewed and the old one can be used on unimportant tracks, but
the rails which have lost their weight by more than ...., should not be used on any track under any circumstances.
(a) 8% (b) 33.3% (c) 10% (d) 20%
Ans : C

__________________
Answered By StudyChaCha Member