SSC Junior Engineer Model Question Paper For Civil

Would you please give here Model Question Paper For Civil engineering students for SSC Junior Engineer recruitment exam ?

As you want I am here giving you Model Question Paper For Civil engineering students for SSC Junior Engineer recruitment exam.

Sample paper :
1. Timber can be made reasonably fireresistant
by
a. soaking it in Ammonium Sulphate
b. coating with Tar paint
c. pumping creosote oil into timber under
high pressure
d. seasoning process

2. Which one of the following statements is
the correct description of the structure of
fibre board ?
a. Thin slices of superior quality of wood
are glued and pressed on the surface of
inferior wood
b. Streamed mass of wood dusts, wood
wool and other vegetable fibres are
pressed hard to a thickness varying
from 3 mm to 12 mm
c. Thin and narrow wood shavings are
soaked in a refractory binder material
and pressed hard
d. Thin and narrow wood shaving are
soaked in a refractory binder material
and pressed hard

3. Match List I(Constituents of bricks) with
List II(corresponding influence) and select
the correct answer :
List I
A. Alumina
B. Silica
C. Magnesia
D. Limestone
List II
1. Colour of brick
2. Plasticity recovery for moulding
3. Reacts with silica during burning and
causes particles to unite together and
development of strength
4. Preserve the for on brick at high
temperature and prevents shrinkage
A B C D
a. 2 1 4 3
b. 3 4 1 2
c. 2 4 1 3
d. 3 1 4 2

In some brick masonry walls,
whitish crystals were found on
surfaces, also chipping and
bricks took place from the same
Which among the following are
of these defects ?
1. Settlement of foundation
2. Over-loading of the walls
3. Sulphate attach
4. Efflorescence
a. 1 and 2
b. 2 and 3
c. 2 and 4
d. 3 and 4

Match List I with list II and
correct answer :
List I(Property)
A. Specific heat of an aggregate
B. Thermal conductivity of an
C. Thermal expansion
D. Durability of concrete
List II(Characteristic)

1. Breaks the bond between the
and the paste
2. Is a measure of its heat capacity
3. Is affected by differences
expansion of two different materials
4. Is a measure of its ability
heat
A B C D
a. 1 3 2 4
b. 2 4 1 3
c. 1 4 2 3
d. 2 3 1 4

Consider the following methods
preservation of timber :
1. Pressure application
2. Brush application
3. Dipping
4. Open tank application
The correct sequence of these methods in
the increasing order of their effectiveness
is :
a. 1, 3 4, 2
b. 3, 4, 2, 1
c. 2, 3, 4, 1
d. 4, 2, 1, 3


SSC Junior Engineer :Question Paper For Civil







here is the attachment.

Attached Files Available for Download

SSC Junior Engineer Question Paper For Civil.pdf (529.3 KB, 18 views)

__________________
Answered By StudyChaCha Member