#1
| |||
| |||
![]()
Will you please give me question paper for the Gate Electrical Engineering examination ??
|
#2
| |||
| |||
![]()
Here I am giving you question paper for the Gate Electrical Engineering examination in PDF file attached with it so you can get it easily.. Some questions are given below : Q.13 The bridge method commonly used for finding mutual inductance is (A) Heaviside Campbell bridge (B) Schering bridge (C) De Sauty bridge (D) Wien bridge Q.19 The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is (A) 4 (B) 6 (C) 8 (D) 10 Q.24 The typical ratio of latching current to holding current in a 20 A thyristor is (A) 5.0 (B) 2.0 (C) 1.0 (D) 0.5 A cylindrical rotor generator delivers 0.5 pu power in the steady-state to an infinite bus through a transmission line of reactance 0.5 pu. The generator no-load voltage is 1.5 pu and the infinite bus voltage is 1 pu. The inertia constant of the generator is 5 MW-s/MVA and the generator reactance is 1 pu. The critical clearing angle, in degrees, for a three-phase dead short circuit fault at the generator terminal is (A) 53.5 (B) 60.2 (C) 70.8 (D) 79.6 Q.36 A 220 V, 15 kW, 1000 rpm shunt motor with armature resistance of 0.25 W has a rated line current of 68 A and a rated field current of 2.2 A. The change in field flux required to obtain a speed of 1600 rpm while drawing a line current of 52.8 A and a field current of 1.8 A is (A) 18.18 % increase (B) 18.18 % decrease (C) 36.36 % increase (D) 36.36 % decrease Q.37 A fair coin is tossed till a head appears for the first time. The probability that the number of required tosses is odd, is (A) 1/3 (B) 1/2 (C) 2/3 (D) ¾
__________________ Answered By StudyChaCha Member |