Mahavitaran question papers and answers for sub engineer

Can you please provide me the solved question paper for sub engineer of Mahavitaran or MahaDiscom (Maharashtra State Electricity Distribution Company Limited - MSEDCL)??

Mahavitaran or MahaDiscom (Maharashtra State Electricity Distribution Company Limited - MSEDCL) is a public sector undertaking (PSU)

Solved Question Paper for Sub Engineer

There analog signals, having bandwidth 1200 Hz, 600 Hz and 600 Hz, are sampled at their respective Nyquist rates, encoded with 12 bit words, and time division multiplexed. The bit rate for the multiplexed signal is

(a) 115.2 kbps

(b) 28.8 kbps

(c) 57.6 kbps (ans)

(d) 38.4 kbps

Solution : The three analog Signals having BW 1200 Hz, 600Hz and 600 Hz are sampled at their respective Nyquist rate i.e. at 2400, 1200, 1200 sample/sec respectively.

The total of (2400 + 1200 + 1200) = 4800 sample/sec

The uint of Ñ x H is
(a) A
(b) A/m
(c) A/m2 (Ans)
(d) A-m

Rest of the Questions are attached in below file which is free of cost

Attached Files Available for Download

Mahavitaran sub engineer Solved Question paper.doc (60.0 KB, 80 views)

Hello sir would you please give me Mahavitaran question papers for sub engineer? and also give me answers? Please help. Thanks!

Mahavitaran is a public sector undertaking controlled by the Government of Maharashtra.

As you want me Mahavitaran question papers for sub engineer so here I am providing you the same………
Mahavitaran question papers and answers for sub engineer
1. Find the Fourier sine transform of f(x), where
f(x) = f(x) 1,0 { 0, x>a
(a) _2/p (cos st / s) (b) _2/p (1 - cos as / s)
(c) _2 (1 - cos as) (d) None of these
2. A random variable X with uniform density in the interval 0 to 1 is Quantized as follows:
If 0 _ X _ 0.3, xq = 0
If 0.3 _ X _ 1, xq = 0.7
Where Xq is the quatized value of x
The root mean square value of the quantization noise is
(a) 0.573 (b) 0.198
(c) 2.205 (d) 0.266
Solution : Since it is uniform as
xq = 0 in the range 0_x_0.3
xq = 0.7 in the range 0.3_x_1
The square mean value is
¥
s2 = _ (x - xq)2 f (x) dx
-¥
1
= _ (x - xq)2 f (x) dx
0
0.3 0.1
= _ (x - 0)2 f (x) dx + _ (x - 0.7)2 f (x) dx
0 0.3
0.3 1
= [x3/3] + [x3/3 + 0.49 x - 1.4]
0 0.3
or s2 = 0.039
The root mean square quantization noise
RMS = _s2
= _0.039 = 0.198
3. Choose the correct one from among the alternatives A, B, C, D after matching an item from Group 1
with the most appropriate item in Group 2.
Group 1 Group 2
1 : FM P : Slope overload
2 : DM Q : m Law
3 : PSK R : Envelope detector
4 : PCM S : Capture effect
T : Hilbert transform
U : Matched filter
(a) 1 - T, 2 - P, 3 - U, 4 – S (b) 1 - S, 2U, 3 - P, 4 - T
(c) 1 - S, 2 - P, 3U, 4 - Q (d) 1 - U, 2 - R, 3 - S, 4 - Q
Solution : FM --- Capture effect --- Receives only strong signal
DM ---- Slop over load Noise
PSK --- Matched filter
PCM - m law - Non linear quantization by using Companding with a law
V = log (1 + m |M|)
log (1 +m )
4. There analog signals, having bandwidth 1200 Hz, 600 Hz and 600 Hz, are sampled at their respective
Nyquist rates, encoded with 12 bit words, and time division multiplexed. The bit rate for the multiplexed
signal is
(a) 115.2 kbps (b) 28.8 kbps
(c) 57.6 kbps (d) 38.4 kbps
Solution : The three analog Signals having BW 1200 Hz, 600Hz and 600 Hz are sampled at their
respective Nyquist rate i.e. at 2400, 1200, 1200 sample/sec respectively.
The total of (2400 + 1200 + 1200) = 4800 sample/sec
The Bit rate = n. fs = (4800 sample/sec) x 12 = 57.6 Kbps
Where n = number of bit in a symbol
5. Find the correct match between group 1 and group 2.
Ground I
P - [1 + km (t)] A sin (wct)
Q - km (t) A sin (wct)
R - A sin [ w'c + k]'-¥ m (t) dt
S - A sin [wct + k '_-¥ m (t) dt]
Solution :
Group II
W - Phase modulation
X - Frequency modulation
Y - Amplitude modulation
Z - DSB-SC modulation
P Q R S
(a) Z Y X W
(b) W X Y Z
(c) X W Z Y
(d) Y Z W X
Solution : The correct match is given below
[1 + km (t)] A sin (wct) Amplitude modulation
km (t) A sin (wct) DB-SC modulation
A sin [w'c + k]'-¥ m (t) dt Phase modulation
A sin [wct + k '_-¥ m (t) dt] Frequency modulation
6. Which of the following analog modulation scheme requires the minimum transmitted power and
minimum channel bandwidth?
(a) VSB (b) DSB-SC
(c) SSB (d) AM
Solution : VSB _ fm + fc
DBS - SC _ 2 fm
SSB _ fm
AM _ 2 fm
Thus SSB has minimum bandwidth and it required minimum power i.e. 17% as compared to AM.
7. A device with input x(t) and output y(t) is characteristic by : y (t) = x2(t). An FM signal with frequency deviation of 90 KHz
and modulation signal bandwidth of 5 KHz is applied to this device. The bandwidth of the output signal is
(a) 370 KHz (b) 190 KHz
(c) 380 KHz (d) 95 KHz
Solution : In present case
_f = 90; fm = 5
â = [_f / fm] = [90/5] = 18
FM equation
A cos [wct + â = sin wmt]
= A cos [wct + 18 sin wmt]
y(t) = x2 (t) = A2 cos2 [wct + 18 Sin wmt]
Note : Cos2 q = [1 + Cos2q] / 2
If there is change in frequency the modulation index also changes in same ratio
y(t) = A2 [(1/2) + (1/2) Cos {2wct + 36Sin wmt}]
y(t) = [(A2/2) + (A2/2) Cos {2wct + 36Sin wmt}]
After the device,
â(new) = 36 = [_f(new) / fm]
_f(new) = 36 x 5 = 180
By carson's rule
Bandwidth = 2(_f + fm)
= 2 (180 + 5)
Bandwidth = 370 kHz
9. A carrier is phase modulated (PM) with frequency deviation of 10 KHz by a single tone frequency of 1 KHz. If the single
tone frequency is increased to 2 KHz, assuming that phase deviation remains unchanged, the bandwidth of
the PM signal is
(a) 21 kHz (b) 22 kHz
(c) 42 kHz (d) 44 kHz
Solution : _f = 10 KHz fm(new) = 2 KHz
fm = 1 KHz
By carson's Rule
BW = 2 (_f + fm) = 2 (10 + 1) = 22 KHz
_ f(new) = 2 x 10 = 20
BW(new) = 2 (20 + 2) = 44 kHz
10 If A and B be the set and Ac and Bc denote the complements of the sets. A and B, then set (A -B) È
(B - A) È (A Ç B) is equal to
(a) A È B (b) Ac È Bc
(c) A Ç B (d) Ac Ç Bc
11 Let G = G(V, E) has five vertices, then the maximum number of m of edges in E, if G is a multigraph
?
(a) 5 (b) 2
(c) 10 (d) Finite or infinite
12 How many straight line can be drawn through 10 points on a circle ?
(a) 10 (b) 20
(c) 45 (d) Infinite
13 . The Fourier transform of unit step function u(t) is
(a) 1 (b) pd(w)
(c) pd(w) - 1/jw (d) pd(w) + 1/jw
14. The value of the integral _ e-2(x - t) d(t - 2) dt is
-_
(a) e-2(x - 2) (b) e2(x - 2)
(c) e-2(x + 2) (d) e2(x + 2)
15. The uint of Ñ x H is
(a) A (b) A/m
(c) A/m2 (d) A-m

__________________
Answered By StudyChaCha Member