Go Back   StudyChaCha 2024 2025 > StudyChaCha Discussion Forum > General Topics

  #1  
Old September 4th, 2013, 10:39 AM
Super Moderator
 
Join Date: Jun 2013
Default

Can you give me the Paper of First Semester 1 Polytechnic Engineering???

here I am giving you question paper for the polytechnic engineering course offered by the Ma'din Polytechnic college ..

diploma in general engineering course papers ::
(Answer the questions in one or two sentences' Each question carries 2 marks)
Marks
(a) List different grades of cement.
(b) Name the engine in which a spark plug is used'
(c) Name any two electrical supply sources'
(d) Define E-waste.
(e) Name two semi conductor materials used for colour LEDs' (5x2=10)

PART_B
(Answer any five questions. Each questio-n carries 6 marks)
Sketch any four types of built-up steel sections.
[hat is the function of a clutch in an automobiie ?
Two resistances of 60 ohms and 30 ohms are connected in parallel with a series
resistance of 20 ohms across a 200 V DC supply- Calculate the current flowing
and voltage across each resistor'
we require a 5 v DC supply for a radio_ receiver. w.e 1e provided with the
mains AC supply voltage of 230 v, 50 Hz. Sketch the circuit diagram for
generating 5 V DC suPPlY.

(e) Explain the preeautions required on handling eleclronic circuits.
(0 List three types of inductive and resistive load of a domestic consumer.
(g) Write notes on water hdmmer. (5x6=30)

II (a)
(b)
(c)
(d)
PART-C
(Answerpur full questions. Each question carries l5 marks)
Describe the instruments used in chain survey'
Draw the elevation of a brick wall in Flemish bond with 4 layers.

The following obseruations are taken in a leveliing work:
0.255, 0.457. 0.760, 1.750, I .995, ?.530, 0.gg0, 0.g45, 0.6g0 and 2.535.
The position of the instrument was changed after the third and eighth readings. Draw
out a page of level field book and enter the readings properly. T'he frrJ reading
was taken on a Bench Mark (BM) of Reduced Level (RL) t-os.zso m. calculate the
RL of all the points by Height-of Collimation method.
with the help of sketch explain the working of steam porver plant.
On
vl with the help of.sketch explain the working of nuclear power plant.

For the complete question paper I am attaching a PDF file with it ..
Attached Files Available for Download
File Type: pdf Ma'din Polytechnic college polytechnic course paper.pdf (1.15 MB, 769 views)

Last edited by Aakashd; May 18th, 2019 at 09:15 PM.
Reply With Quote
Other Discussions related to this topic
Thread
mba first semester question paper
Download PTU BBA 3rd Semester Exam Paper
LLB 3rd semester back paper
SMU Question Paper MBA Second Semester
Question Bank for CSE 5th Semester Paper
MBA 1st semester question paper model
Diploma Computer Engineering 5th Semester Last Year Paper
UOP Chemical Engineering 3rd semester-chemical engineering materials exam paper
GTU Aeronautical Engineering Semester-I Chemistry Exam Paper
GTU Aeronautical Engineering Semester-I Maths 1exam paper
PTU Question Paper MBA 3rd Semester
PTU question paper MBA 1st semester
Mumbai University B.E in Bio-medical Engineering 3rd Semester Engineering Mathematics
University of Pune B.Tech 2nd Semester-Basic Electronics Engineering Exam Paper
UOP B.Tech 1st Semester-Engineering Mathematics-I Exam paper
Want MCA 2nd Semester Assignment solved paper
question paper GJU Hisar, MBA 2nd semester?
Electronics and Communication Engineering 6th Semester Paper
Foundation Engineering Civil 5th Semester Anna University Trichy Question Paper
Chennai IIT Semester Paper






  #2  
Old September 4th, 2013, 05:51 PM
Super Moderator
 
Join Date: Jun 2013
Default Re: Paper of First Semester 1 Polytechnic Engineering

As per your demand here I am attaching a document file having the Paper of First Semester 1 Polytechnic Engineering, it contains question paper of mathematics subject. The question paper is of 100 marks. I have taken following questions from the attachment:

Q4.(a) If the radius of sphere is measured as 5 cm with a possible error of 0.2 cm. Find
approximately the greatest possible error and percentage error in the compound value
of the volume.
(b) Fins the point on the plane ax + by + cz = p at which the function f = ( x2 + y2 +z2) has
a maximum value and hence the maximum.
(c) Find the dimensions of a rectangular closed box of maximum capacity whose surface is
given.

For complete question paper download the attachment…
Attached Files Available for Download
File Type: pdf Paper of First Semester 1 Polytechnic Engineering.pdf (113.4 KB, 2431 views)
Reply With Quote
  #3  
Old July 23rd, 2014, 09:30 PM
M.pandidhurai
Guest
 
Default

[QUOTE=mathematics 1-2;370692]Can you give me the Paper of First Semester 1 Polytechnic Engineering???[yes/QUOTE]
Reply With Quote
  #4  
Old October 6th, 2014, 09:16 AM
my name manoj
Guest
 
Default

Can you give me the Paper of First Semester 1 Polytechnic Engineering
Reply With Quote
  #5  
Old April 16th, 2015, 06:04 PM
Junior Member
 
Join Date: Apr 2015
Default

Can you give me the Paper of First english model paper Semester 1 Polytechnic Engineering?
Reply With Quote
  #6  
Old April 16th, 2015, 06:07 PM
Junior Member
 
Join Date: Apr 2015
Default Re: Paper of First Semester 1 Polytechnic Engineering

i want english model paper for 1st sem dimploma
Reply With Quote
  #7  
Old August 22nd, 2015, 11:56 AM
Unregistered
Guest
 
Default Re: Paper of First Semester 1 Polytechnic Engineering

can you give me question paper
Reply With Quote
  #8  
Old September 17th, 2015, 09:39 PM
Unregistered
Guest
 
Default

[QUOTE=Unregistered;370692]Can you give me the Paper of First Semester 1 Polytechnic Engineering???chemistry
Reply With Quote
  #9  
Old October 27th, 2015, 08:31 PM
Unregistered
Guest
 
Default Re: Paper of First Semester 1 Polytechnic Engineering

I want m-scheme maths question paper for 1st year polytechnic 1st semester
Reply With Quote
  #10  
Old November 9th, 2015, 03:46 AM
Junior Member
 
Join Date: Nov 2015
Default Re: Paper of First Semester 1 Polytechnic Engineering

HELP ME FRIENDS
i want a last 5 years question paper of BTU Diploma Electrical Engg.
Reply With Quote
Reply




All times are GMT +6. The time now is 11:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Friendly URLs by vBSEO 3.6.0 PL2

1 2 3 4 5 6 7 8