Fluke 345 Pq Meter

I want to purchase Fluke 345 Power Quality Clamp Meter so can you please tell me the specifications of it?

Fluke 345 Power Quality Clamp Meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads.

Power Quality Clamp Meter - Fluke 345




Display
Color transmissive LCD 320 x 240 pixels (70 mm diagonal) with 2 level backlight

Power supply Battery type 1.5 V Alkaline AA MN 1500 or IEC LR6 x 6

Battery life typically > 10 hours (backlight on full)
> 12 hours (backlight reduced)

Battery Eliminator BE345 Input 110/230 V 50/60 Hz
Output 15 V dc, 300 mA

Ambient conditions (For indoor use only)

Reference conditions All accuracies stated at 23˚C ± 1˚C (73.4 °F ± 1.8 °F)
Operating temperature 0 °C to 50 °C (32 °F to 122 °F)
Temperature coefficient of current ≤ ± 0.15 % of rdg per °C
Temperature coefficient of voltage ≤ ± 0.15 % of rdg per °C
Maximum relative humidity 80 % for temperatures up to 31 °C (87 °F) decreasing linearly to 50 % relative humidity at 40 °C (104 °F)
Maximum operating altitude 2000 m

Electrical safety
Maximum safe working voltages Safety IEC 61010-1 600 V CAT IV double or reinforced insulation, pollution degree 2
Protection IP40; EN60529
Current measurement 600 V ac rms or dc between uninsulated conductor and ground
Voltage measurement 600 V ac rms or dc between either input terminal and ground, or 825 V between energized phase voltages (delta power config.)

EMC
Emission IEC/EN 61326-1:1997 class A
Immunity IEC/EN 61326-1:1997 Annex C Performance Criterion B

Mechanical
Dimensions (length x width x depth) 300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in)
Weight including batteries 820 g/1.8 lb
Jaw opening 60 mm
Jaw capacity 58 mm diameter
Cleaning The unit can be cleaned with an Isopropanol impregnated cloth. Do not use abrasives or other solvents.

Current measurement (dc, dc rms, ac rms)
Measuring range 0 to 2000 A dc or 1400 ac rms
Autorange facility 40 A / 400 A / 2000 A
Resolution 10 mA in 40 A range
100 mA in 400 A range
1 A in 2000 A range
Accuracy: DC and dc rms I > 10 A: ± 1.5 % rdg ± 5 digits
I < 10 A: ± 0.2 A
Accuracy: AVG I > 10 A: ± 3 % rdg ± 5 digits
I < 10 A: ± 0.5 A
Accuracy: Pk I > 10 A: ± 5 % rdg ± 5 digits
I < 10 A: ± 0.5 A
Accuracy: AHr I > 10 A: ± 2 % rdg ± 5 digits
I < 10 A: ± 0.5 AHr
Accuracy: CF (Crest Factor) 1.1 ≤ CF < 3: ± 3 % rdg ± 5 digits
3 ≤ CF < 5: ± 5 % rdg ± 5 digits
Resolution: 0.01
Accuracy: RPL (Ripple) 2 % ≤ RPL < 100 %: ± 3 % rdg ± 5 digits
100 % ≤ RPL < 600 %: ± 5 % rdg ± 5 digits
Resolution: 0.1 %
Idc > 5 A, Iac > 2 A


Voltage measurement (dc, dc rms, ac rms)
Measuring range 0 to 825 V dc or ac rms
Autorange facility 4 V / 40 V / 400 V / 750 V
Resolution 1 mV in 4 V range
10 mV in 40 V range
100 mV in 400 V range
1 V in 750 V range
Accuracy: DC and dc rms V > 1 V: ± 1 % rdg ± 5 digits
V < 1 V: ± 0.02 V
Accuracy: AVG V > 1 V: ± 3 % rdg ± 5 digits
V < 1 V: ± 0.03 V
Accuracy: Pk V > 1 V: ± 5 % rdg ± 5 digits
V < 1 V: ± 0.03 V
Accuracy: CF (Crest Factor) 1.1 ≤ CF < 3: ± 3 % rdg ± 5 digits
3 ≤ CF < 5: ± 5 % rdg ± 5 digits
Resolution: 0.01
Accuracy: RPL (Ripple) 2 % ≤ RPL < 100 %: ± 3 % rdg ± 5 digits
100 % ≤ RPL < 600 %: ± 5 % rdg ± 5 digits
Resolution: 0.1 %
Vdc > 0.5 V, Vac > 0.2 V
All measurements dc and 15 Hz to 1 kHz
Maximum overload 1,000 V rms
Volts rms is a true-rms measurement (ac + dc)

Models and Accessories-

Power Quality Clamp Meter
Includes:

345 Power Quality Clamp Meter
Soft carrying case
Power Log software
Test leads
Alligator clips
Test probes
USB cable
International ac adapter / battery eliminator
Printed English language user manual
Multi-language manual CD

Clips
AC220 AC220 SureGrip™ Alligator Clip Set

Test Probes
TLK291 TLK291 Fused test probe set
TP1 TP1 Slim Reach Test Probe (flat blade)
TP220 TP220 SureGrip™ Industrial Test Probes

Cases and Holsters
C345 C345 Soft Carrying Case
C550 C550 Tool Bag

Lights
L200 L200 Probe Light
L210 L210 Probe Light + Probe Extender

__________________
Answered By StudyChaCha Member