CIDCO Caller Id Change Language

Hi I am interested in having the procedure to be followed for setting up the CPE CALLER ID UNIT – CIDCO including setting the language?

The procedure to be followed for setting up the CPE CALLER ID UNIT – CIDCO including setting the language is given below.

Instructions to Install CIDCO Caller Id Unit

Step 1

Before utilizing this item, check with your nearby phone organization to guarantee that your administration is initiated.

Step 2: PARTS

Guest ID Unit

6 foot long rope

3 AAA Batteries (don't utilize Lithium or Ni-Cad Batteries)

Step 3: Installing Batteries

Your batteries may be pre-introduced. Provided that this is true, expel the draw tab to initiate your unit. On the off chance that batteries are not pre-introduced, utilize the accompanying system to begin your unit.

Before associating your unit to your phone:

1. Turn the unit over.

2. Push down on the battery cover.

3. Slide off toward the bolt.

4. Embed the batteries. Try not to utilize lithium or ni-miscreant batteries.

Time and Date

The show is clear until you get the principal call. Press either key until the - NO CALLS-message seems to confirm that the unit works.

The right time and date are updaged with each new call record.

It is unrealistic to physically set the time and date.

Step 4: Choosing a Language

Your Caller ID unit can dispaly messages in Spanish, French, and English and is preset to English. To pick a dialect other than English:

1. Hold down both keys until the SELECT LANGUAGE message shows up.

2. Press Delete to pick Spanish, press to pick English.

To change your show dialect, rehash the first steps and pick another dialect.

Step 5: If associating with a Telephone see Instructions: How to Connect Your Unit to a Telephone;
if interfacing with an Answering Machine see Instructions: How to Connect Your Unit to an Answering Machine.

The most effective method to Connect Your Unit to a Phone

1. Detach the line from the phone. Connect the string to one of the jacks on the back of the Caller ID unit.

2. Plug one end of the provided six foot line string into the rest of the jack of the Caller ID unit. Connect the flip side to the phone.

3. Check for a dial tone to guarantee appropriate association. On the off chance that there is no dial tone, see Troubleshooting.

__________________
Answered By StudyChaCha Member