GATE Mechanical Solved question papers

shabnams · #41 September 17th, 2015, 04:30 PM

As you want I am here giving you sample question paper of GATE exam for getting admission in MTECh Mechanical Engineering.

Sample paper :
What is the adverb for the given word below? Misogynous (A) Misogynousness (B) Misogynity (C) Misogynously (D) Misogynous Answer: (C)

Choose the appropriate word/phrase, out of the four options given below, to complete the following sentence: Dhoni, as well as the other team members of Indian team, _____ present on the occasion. (A) were (B) was (C) has (D) have Answer: (B)

Choose the word most similar in meaning to the given word: Awkward (A) Inept (B) Graceful (C) Suitable (D) Dreadful Answer: (A

Given below are two statements followed by two conclusions. Assuming these statements to be true, decide which one logically follows.
Statement: I. All film stars are playback singers. II. All film directors are film stars. Conclusions: I. All film directors are playback singers. II. Some film stars are film directors.
(A) Only conclusion I follows (B) Only conclusion II follows (C) Neither conclusion I nor II follows (D) Both conclusions I and II follow

8. Lamenting the gradual sidelining of the arts in school curricula, a group of prominent artists wrote to the Chief Minister last year, asking him to allocate more funds to support arts education in schools. However, no such increase has been announced in this year‟s Budget. The artists expressed their deep anguish at their request not being approved, but many of them remain optimistic about funding in the future. Which of the statement(s) below is/are logically valid and can be inferred from the above statements? i. The artists expected funding for the arts to increase this year. ii. The Chief Minister was receptive to the idea of increasing funding for the arts. iii. The Chief Minister is a prominent artist. iv. Schools are giving less importance to arts education nowadays.
(A) iii and iv (B) i and iv (C) i, ii and iv (D) i and iii

10. A tiger is 50 leaps of its own behind a deer. The tiger takes 5 leaps per minute to the deer‟s 4. If the tiger and the deer cover 8 metre and 5 metre per leap respectively, what distance in meters will the tiger have a run before it catches the deer?
Answer: 800

The function of interpolator in a CNC machine controller is to (A) control spindle speed (B) coordinate feed rates of axes (C) control tool rapid approach speed (D) perform Miscellaneous (M) functions (tool change, coolant control etc.) Answer: (B)

Here is the attachment.

#42 September 24th, 2015, 01:16 PM

Hello sir would you please give me Previous Years Question Papers of GATE Mechanical Engineering Exam? Its very urgent sir please help…

Vinodt · #43 September 24th, 2015, 01:20 PM

As you want Previous Years Question Papers of GATE Mechanical Engineering Exam so here I am providing you the same, please have a look….

1. The natural frequency of an undamped vi br ati n g system
with a damping factor of 0. 8 is introduced into the system
vi br ati on of the damped system, in rad/s, is
(a) 60
(b) 75
(c) 80

2. Deep hole drilling of small diameter, say 0.2 m m is done with ED M by selecting
the tool material as
(a) copper wire
(c) brass wire
(b) tungsten wire
(d) tungsten carbide

3. In computer aided drafting practice, an arc is defined by
(a) two end points only
(b) center and radius
(c) radius and one end point
(d) two end points an~

4. In a 5 kW cooling capadty refrigeration system operating on a sim pie vapour
compression cycle, the refi'i ger ant enters the evaporator with an enthalpy of 7 5
kJ/k g and I eaves with an en th alp y of 183 kJ/k g. The en th alp y of the refrigerant
after compression is 210 kJ/k g. Show the cycle on T -s or p-h diagram . Cal cui ate
the followmg:
(a) COP
(b) power 1n put to compressor and

5. Two castings, a cube and a slab of the same material solidify under identical
mould conditions. The val um es of the castings are equal but the slab dim en si ons
are in the ratio of 1:2:4. Find the ratio of the solidification time of the cube to

6. A cylindrical billet of lOOm m diameter is forged from 50 m m height to 40 mm at
1000°C. The material has a constant flow stress of 80 MPa.
(a) Find the work of deformation.
(b) If a 10 kN drop-hammer is used to complete the reduction in one blow, what
will be the height of the fall?

GATE Mechanical Engineering Exam Previous Years Question Papers

For more papers here I am attaching pdf file which are free for download….

#44 September 25th, 2015, 05:48 PM

I need the GATE Mechanical Branch previous year Question Paper for the preparation of this exam so can you please provide me this?

Vinodt · #45 September 25th, 2015, 05:53 PM

As you need the GATE Mechanical Branch previous year Question Paper so here I am providing you the same

1. “India is a country of rich heritage and cultural diversity.” Which one of the following facts
best supports the claim made in the above sentence?
(A) India is a union of 28 states and 7 union territories.
(B) India has a population of over 1.1 billion.
(C) India is home to 22 official languages and thousands of dialects.
(D) The Indian cricket team draws players from over ten states.
Answer: C
Exp: Diversity is shown in terms of difference language

2. The value of one U.S. dollar is 65 Indian Rupees today, compared to 60 last year. The Indian
Rupee has ____________.
(A) Depressed (B) Depreciated (C) Appreciated (D) Stabilized
Answer: B

3. 'Advice' is ________________.
(A) a verb (B) a noun
(C) an adjective (D) both a verb and a noun
For complete paper here is the PDF file

GATE Mechanical Question Paper

#46 October 2nd, 2015, 12:51 PM

I have applied for the GATE Mechanical Engineering exam and want to get the previous year question Paper of it so can you please provide me this?

Vinodt · #47 October 2nd, 2015, 12:55 PM

As you need the GATE Mechanical Engineering exam previous year question Paper so here I am sharing this

1. “India is a country of rich heritage and cultural diversity.” Which one of the following facts
best supports the claim made in the above sentence?
(A) India is a union of 28 states and 7 union territories.
(B) India has a population of over 1.1 billion.
(C) India is home to 22 official languages and thousands of dialects.
(D) The Indian cricket team draws players from over ten states.
Answer: C
Exp: Diversity is shown in terms of difference language

2. The value of one U.S. dollar is 65 Indian Rupees today, compared to 60 last year. The Indian
Rupee has ____________.
(A) Depressed (B) Depreciated (C) Appreciated (D) Stabilized
Answer: B

3. 'Advice' is ________________.
(A) a verb (B) a noun
(C) an adjective (D) both a verb and a noun
Answer: B

GATE Mechanical Engineering Question Paper

For complete paper here is the attachment

#48 October 26th, 2015, 04:00 PM

Will you please give here solved question paper of Mechanical Engineering stream for GATE exam I am looking for the same ?

shabnams · #49 October 26th, 2015, 04:09 PM

As per your requirement I am here giving you solved question paper of Mechanical Engineering stream for GATE exam.

Sample paper “:

1. “India is a country of rich heritage and cultural diversity.” Which one of the following facts
best supports the claim made in the above sentence?
(A) India is a union of 28 states and 7 union territories.
(B) India has a population of over 1.1 billion.
(C) India is home to 22 official languages and thousands of dialects.
(D) The Indian cricket team draws players from over ten states.
Answer: C
Exp: Diversity is shown in terms of difference language
2. The value of one U.S. dollar is 65 Indian Rupees today, compared to 60 last year. The Indian
Rupee has ____________.
(A) Depressed (B) Depreciated (C) Appreciated (D) Stabilized
Answer: B
3. 'Advice' is ________________.
(A) a verb (B) a noun
(C) an adjective (D) both a verb and a noun
Answer: B
5. In which of the following options will the expression P < M be definitely true?
(A) M < R > P > S (B) M > S < P < F
(C) Q < M < F = P (D) P = A < R < M
Answer: D
Q. No. 6 – 10 Carry Two Marks Each
6. Find the next term in the sequence: 7G, 11K, 13M, ___
(A) 15Q (B) 17Q (C) 15P (D) 17P
Answer: B
2. If a function is continuous at a point,
(A) The limit of the function may not exist at the point
(B) The function must be derivable at the point
(C) The limit of the function at the point tends to infinity
(D) The limit must exist at the point and the value of limit should be same as the value of the
function at that point
Answer: (D)
Exp: We know that ( ) f x is continuous at x=a, if ( )
x a
lim f x
®
exists and equal to ( ) f a
3. Divergence of the vector field 2 2 ˆ ˆ ˆ x zi xyj yz k + − at (1, -1, 1) is
(A) 0 (B) 3 (C) 5 (D) 6
Answer: (C)

Here is the attachment.