2021-2022 StudyChaCha

#1
May 22nd, 2014, 06:39 PM
 Super Moderator Join Date: Jun 2011

Please provide me syllabus for B tech course offered by National Power Training Institute (NPTI) ??

Here I am giving you syllabus for B tech course offered by National Power Training Institute (NPTI) in a PDF file attached with it so you can get it easily.

B tech exam syllabus :
1st semester :
Code No. Paper
THEORY PAPERS
ETMA 101 Applied Mathematics – I
ETPH 103 Applied Physics – I
ETCH 105 Applied Chemistry – I
ETME 107 Manufacturing Process
ETCS 109 Introduction to Computers and Auto CAD
ETEL 111 Communication Skills – I
ETEL 113 Impact of Science & Technology on Society

PRACTICAL/VIVA VOCE
ETPH 151 Applied Physics Lab. – I
ETCH 153 Applied Chemistry Lab. – I
ETCS 155 Introduction to Auto CAD
Office Automation and Web
Design
ETME 157 Workshop Practice
ETME 159 Engineering Graphics Lab.

2nd semester :
THEORY PAPERS
ETMA 102 Applied Mathematics – II
ETPH 104 Applied Physics – II
ETCH 106 Applied Chemistry – II
ETCS 108 Introduction to Programming
ETME 110 Engineering Mechanics
ETEC 112 Electrical Science
ETEL 114 Communication Skills – II

PRACTICAL/VIVA VOCE
ETPH 152 Applied Physics Lab. – II
ETCH 154 Applied Chemistry Lab. – II
ETCS 156 C Programming Lab.
ETME 158 Engineering Mechanics Lab.
ETEC 160 Electrical Science Lab.

UNIT I
COMPLEX NUMBERS AND INFINITE SERIES:
De Moivre’s theorem and roots of complex numbers. Euler’s theorem, Logarithmic Functions,
Circular, Hyperbolic Functions and their Inverses.
Convergence and Divergence of Infinite series, Comparison test d’Alembert’s ratio test. Higher
ratio test, Cauchy’s root test. Alternating series, Lebnitz test, Absolute and conditioinal
convergence. (No. of Hrs. 10)

UNIT II
CALCULUS OF ONE VARIABLE:
Successive differentiation. Leibnitz theorem (without proof) McLaurin’s and Taylor’s expansion
of functions, errors and approximation.
Asymptotes of Cartesian curves.
Curveture of curves in Cartesian, parametric and polar coordinates, Tracing of curves in Cartesian,
parametric and polar coordinates (like conics, astroid, hypocycloid, Folium of Descartes, Cycloid,
Circle, Cardiode, Lemniscate of Bernoulli, equiangular spiral).
Reduction Formulae for evaluating
Finding area under the curves, Length of the curves, volume and surface of solids of revolution.
(No. of Hrs. 15)

UNIT III
LINEAR ALGEBRA – MATERICES:
Rank of matrix, Linear transformations, Hermitian and skeew – Hermitian forms, Inverse of matrix
by elementary operations. Consistency of linear simultaneous equations, Diagonalisation of a
matrix, Eigen values and eigen vectors. Caley – Hamilton theorem (without proof).
(No. of Hrs. 09)

UNIT IV
ORDINARY DIFFERENTIAL EQUATIONS:
First order differential equations – exact and reducible to exact form. Linear differential equations
of higher order with constant coefficients. Solution of simultaneous differential equations.
Variation of parameters, Solution of homogeneous differential equations – Canchy and Legendre
forms.

Text books:
1. Kresyzig, E., “Advanced Engineering Mathematics”, John Wiley and Sons.
(Latest edition).
2. Jain, R. K. and Iyengar, S. R. K., “Advanced Engineering Mathematics”, Narosa,
5
2003 (2nd Ed.).
3. “Advanced Engineering Mathematics”, Dr. A. B. Mathur, V. P. Jaggi (Khanna
publications)

References books:
1. Mitin, V. V.; Polis, M. P. and Romanov, D. A., “Modern Advanced Mathematics for
Engineers”, John Wiley and Sons, 2001.
2. Wylie, R., “Advanced Engineering Mathematics”, McGraw-Hill, 1995.

Paper Code: ETPH – 103 L T C
Paper: APPLIED PHYSICS – I 2 1 3
INSTRUCTIONS TO PAPER SETTERS: MAXIMUM MARKS: 75
1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It
should be of 25 marks.
2. Every unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of
12.5 marks.

UNIT I
Interference of Light: Interference due to division of wavefront and division of amplitude,
Young’s double slit expt., Interference, Principle of Superposition, Theory of Biprism, Interference
from parallel thin films, wedge shaped films, Newton rings, Michelson interferometer.

Diffraction: Fresnel Diffraction, Diffraction at a straight edge, Fraunhoffer diffraction due to N
slits, Diffraction grating, absent spectra, dispersive power of Grating, resolving power of prism and
grating.
(No. of Hrs. 8)

UNIT II
Polarization: Introduction, production of plane polarized light by different methods, Brewster and
Malus Laws. Double refraction, Quarter & half wave plate, Nicol prism, specific rotation,
Optical Instruments : Ramdson & Huygen Eye pieces, Electron microscope.
(No. of Hrs. 7)

UNIT III
Laser: Introduction, temporal and spatial coherence, principle of Laser, stimulated and
spontaneous emission, Einstein’s Coefficients, He-Ne Laser, Ruby Laser, Application of Lasers.

Fibre Optics: Introduction, numerical aperture, step index and graded index fibres, attenuation &
dispersion mechanism in optical fibers (Qualitative only), application of optical fibres, optical
communication (block diagram only)
(No. of Hrs. 8)

UNIT IV
Mechanics: Central and non-central forces, Inverse square force, SHM, Damped, undamped and
forced Oscillations.
Special theory of Relativity: Frame of reference, Michelson-Morley experiment, basic postulates
of special relativity, Lorentz transformations (space – time coordinates & velocity only), mass
energy relation.
(No. of Hrs. 8)

Text Books:
1. A. Ghatak, “Optics”
2. N. Subrahmanyam and Brij Lal, “Optics”
3. Jenkins and White, “Fundamentals of Optics”
4. C. Kittle, “Mechanics”, Berkeley Physics Course, Vol.- I.
5. A. Beiser, “Concepts of Modern Physics”

Paper Code: ETCH – 105 L T C
Paper: Applied Chemistry – I 2 1 3
INSTRUCTIONS TO PAPER SETTERS: MAXIMUM MARKS: 75
1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It
should be of 25 marks.
2. Every unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of
12.5 marks.

UNIT I
Water: Specifications for water, analysis of water – alkalinity, hardness and its determination
(EDTA method only). Water for domestic use, Water softening processes – Lime – Soda process,
Ion exchange method, boiler feed water, boiler problems-scale, sludge, priming and foaming,
caustic embitterment and corrosion, their causes and prevention, removal of silica, removal of
dissolved gases, carbonate and phosphate conditioning, colloidal conditioning, calgon treatment,
Numerical problems on alkalinity, hardness, Lime-Soda process and Ion exchange method, EDTA
method. [No. of Hrs: 08]

UNIT II
Fuels: Classification, combustion and chemical principles involved in it, calorific value: gross and
net calorific values and their determination by bomb calorimeter and Boy’s gas calorimeter.

Solid Fuels: Proximate and ultimate analysis of coal and their importance, High and low
temperature carbonisation, Coke: Its manufacture by Otto Hoffman oven.

Liquid Fuels: Conversion of coal into liquid fuels (Bergius process and Fisher-Tropsch Process)
and mechanism, Petroleum: its chemical composition and fractional distillation, cracking of heavy
oil residues – thermal and catalytic cracking, knocking and chemical structure, octane number and
cetane number and their significance, power alcohol, Analysis of flue gases by Orsat’s apparatus,
Numerical on calorific value, combustion, proximate and ultimate analysis of coal, flue gas
analysis.
[No. of Hrs: 08]

UNIT III
Environmental Pollution and Control:
Air Pollution: Types of pollutants, source effects, sink and control of primary pollutants – CO,
Nox, HC, Sox and particulates, effects of pollutants on man and environment – photochemical
smog and acid rain.

Water Pollution: Classification of pollutants, their sources, waste water treatment – domestic and
industrial.

Soil Pollution: Composition of soil, classification and effects of soil pollutants and their control.

Solid Waste Pollution: Classification, waste treatment & Disposal methods (Composting, sanitary
landfilling, thermal processes, recycling and reuse).

Hazardous Wastes: Classification – radioactive, biomedical and chemical, treatment and disposal
– physical, chemical and biological processes.

[No. of Hrs: 08]
UNIT IV
Solutions: Ideal and non-ideal solutions, Raoult’s Law, Distillation of binary solutions, Henry’s
Law, Nernst distribution law, Arrhenius theory and special behaviour of strong electrolytes.

Corrosion: Types of corrosion (dry, wet, atmospheric and soil corrosion), theories of corrosion,
protective measures against corrosion. [No. of Hrs: 08]

Text Books:
1. Chemistry in Engineering & Technology (Vol I & II) (Latest ed.), By J.C. Kuriacose & J.
Rajaram
2. Environmental Chemistry & Pollution Control (Latest ed.), By S.S. Dara
3. Applied Chemistry (Latest ed.), By H.D. Gesser

Paper Code: ETME 107 L T C
Paper: Manufacturing Processes 2 0 2
INSTRUCTIONS TO PAPER SETTERS: MAXIMUM MARKS: 75
1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It
should be of 25 marks.
2. Every unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of
12.5 marks.

UNIT-I
Casting Processes:
Principles of metal casting: Pattern materials, types and allowance; Study of moulding, sand
moulding, tools, moulding materials, classification of moulds, core, elements of gating system,
casting defects, description and operation of cupola: special casting processes e.g. die-casting,
permanent mould casting, centrifugal casting, investment casting.
[No. of Hrs. 6]

UNIT-II
Smithy and Forging:
Basic operation e.g. upsetting, fullering, flattening, drawing, swaging: tools and appliances: drop
forging, press forging.

Bench Work and Fitting
Fitting, sawing, chipping, thread cutting (die), tapping; Study of hand tools, Marking and marking
tools. [No. of Hrs. 6]

UNIT-III
Metal joining:
Welding principles, classification of welding techniques; Oxyacetylene Gas welding, equipment
and field of application, Arc-welding, metal arc, Carbon arc, submerged arc and atomic hydrogen
welding, Electric resistance welding: spot, seam, butt, and percussion welding; Flux: composition,
properties and function; Electrodes, Types of joints and edge preparation, Brazing and soldering.

[No. of Hrs. 6]
UNIT-IV
Sheet Metal Work:
Common processes, tools and equipments; metals used for sheets, standard specification for sheets,
spinning, bending, embossing and coining.

[No. of Hrs. 5]
Text Books:
1. Manufacturing Process by Raghuvanshi.
1. 1. Manufacturing Technology by P.N.Rao (TMH publications)

Reference Books:
1. 1. Workshop Technology by Hazra-Chowdhary
2. 2. Production Engineering by R.K.Jain
3. 3. Workshop Technology by Chapman

Paper Code: ETCS 109 L T C
Paper: Introduction to Computer Systems 2 1 3
INSTRUCTIONS TO PAPER SETTERS: MAXIMUM MARKS: 75
1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It
should be of 25 marks.
2. Every unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of
12.5 marks.

UNIT I
Introduction to Computer:
Overview of Computer organization and historical perspective computer applications in various
fields of science and management.
Data representation: Number systems, character representation codes, Binary, hex, octal codes and
their inter conversions.
Binary arithmetic, Floating-point arithmetic, signed and unsigned numbers.
[No. of Hrs. 8]

UNIT II
Introduction to OS and Office Automation
Concept of computing, Introduction to Operating Systems such as DOS, windows 2000/Xp,
UNIX, Client Server Technology, etc. (only brief user level description).
Introduction to World Processing, Spread Sheet & Presentation software e.g. MS-Word, MSExcel,
MS-Power Point.
[No. of Hrs. 8]

UNIT III
Coordinate System, 2D drafting: lines, circles, arc, polygon, etc., Editing, 3D, Solid modeling,
Rendering, Use of Auto CAD for engineering drawing practices.
[No. of Hrs. 8]

UNIT IV
Web Technologies
Introduction to World Wide Web, Search engines, e-mail, news, gopher, Audio & Video
Conferencing, Internet Protocols: FTP, telnet, TCP/IP, SMTP, HTTP, Languages used for WEB
Technology: HTML, practical examples using DHTML and Static HTML

[No. of Hrs. 8]
Text Books:
1. Rajaraman, “Fundamentals of Computers”, Prentice Hall of India, 3rd Edition.
2. Mark Middlebrook, “Autocad 2004 for Dummies”, Pustak Mahel Prakashan, 2000.
3. Alexis Leon & Mathews Leon, “Fundamentals of Computer Science & Communication
Engineering”, Leon Techworld, 1998.

Reference Books:
1. Omura, “Mastering Autocad 2000 for Mechanical Eng ineers” BPB Publications, 2nd
Edition, 1998.
2. A.S. Tanenbaum, “ Computer Networks”, Pearson Education India Ltd., 3rd Edition, 2002.

Paper Code: ETEL-111 L T C
Paper: Communication Skills – I 2 1 3
INSTRUCTIONS TO PAPER SETTERS: MAXIMUM MARKS: 75
1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It
should be of 25 marks.
2. Every unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of
12.5 marks.

Unit I
Remedial Grammar: Errors of Accidence and syntax with reference to Parts of Speech;
Agreement of Subject and Verb; Tense and Concord; Conditional Clauses; Use of connectives in
Complex and Compound sentences; Question tags and short responses.

[No. of Hrs: 06]
Unit II
Vocabulary and Usage: Word Formations (by adding suffixes and prefixes); Technical Word
Formation; Synonyms, Antonyms, Homophones, and Homonyms; One Word Substitution;
Misappropriations; Indianisms; Redundant Words; Phrasal Verb Idioms.

[No. of Hrs: 06]
Unit III
Technical Writing:

(A) Scientific Attitude and Impersonal Style; Plain Statements, Definitions; Description and
Explanations (of objects, instruments, Processes, Scientific Principles, etc.)
Summarizing and abstracting; Expressing ideas within a restricted word limit; Paragraph
Writing (Paragraph division, introduction and the conclusion, Variety in sentences and
paragraphs)
Interpretation and use of charts, graphs and tables in technical writing.
Punctuation

(B) Reading at various speeds (slow, fast, very fast); reading different kinds of texts for
different purpose (e.g. for relaxation, for information, for discussion at a later stage, etc.);
Comprehension of Unseen Passages [No. of Hrs: 10]

Unit IV
Text: The following prose pieces from Best Science Writing : Reading and Insights edited by
Robert Gannon prescribed text (Hyderabad: University Press (India) Limited, 1991).
1. Chapter 2: “After 63 years, Why Are They Still Testing Einstein?” by C.P. Gilmore
2. Chapter 5: “Star Wars : The Leaky Shield” By Carl Sagan
3. Chapter 10: “Chaos : The Ultimate Asymmetry” by Arthur Fisher
4. Chapter 11: “Bill Moss, Tentmaker” by Robert Gannon
5. Chapter 12: “Totality - A Report” by Michael Rogers

[No. of Hrs: 10]
Text Books:
2. Sharma, R.S. Technical Writing. Delhi: Radha Publication, 1999
3. Sudarsanam, R. Understanding Technical English. Delhi: Sterling Publishers Pvt. Ltd.,
1992

4. Gannon, Robert, Edt. Best Science Writing: Readings and Insights. Hyderabad: University
Press (India) Limited, 1991.

Paper Code: ETEL-113 L T C
Paper: Impact of Science & Technology on Society 1 0 1
*Non University Examination Scheme (NUES)
There will not be any external examination of the university. The performance of the candidates should
continuously be evaluated by an internal committee. The committee may conduct viva-voce at the end for
the award of the marks.

Paper Code: ETPH-151 P C
Paper: APPLIED PHYSICS LAB – I 2 1
List of Experiments
(1) To plot a graph between the distance of the knife-edge from the center of the gravity and
the time period of bar pendulum. From the graph, find
(a) The acceleration due to gravity
(b) The radius of gyration and the moment of inertia of the bar about an axis.
(2) To determine the moment of inertia of a flywheel about its own axis of rotation.
(3) To determine the value of acceleration due to gravity using koter’s pendulum.
(4) To determine the frequency of A.C. mains using sonometer and an electromagnet.
(5) To determine the frequency of electrically maintained turning fork by Melde’s method.
(6) To determine the dispersive power of prism using spectrometer and mercury source.
(7) To determine the wavelength of sodium light by Newton’s Ring.
(8) To determine the wavelength of sodium light using diffraction grating.
(9) To determine the refractive index of a prism using spectrometer.
(10) To determine the specific rotation of cane sugar solution with the help of polarimeter.
(11) To find the wavelength of He-Ne Laser using transmission diffraction grating.
(12) To determine the numeral aperture (NA) of a Optical Fibre.
(13) Compute simulation (simple application of Monte Carlo) e.g. Brownian motion,
charging & discharging of capacitor.
Note: Any 8-10 experiments out of the list may be chosen. Proper error – analysis must be carried
out with all the experiments.

Paper Code: ETCH – 153 P C
Paper: Applied Chemistry Lab – I 2 1
List of Experiments
1. To determine the percentage composition of a mixture of Sodium hydroxide and Sodium
Chloride.
2. To determine the amount of Sodium Carbonate in the given mixture of Sodium Carbonate
and Sodium Bicarbonate.
3. Determine the amount of Oxalic Acid and Sulphuric Acid/Hydrochloric Acid in one litre of
solution given standard Sodium Hydroxide and Potassium Permanganate.
4. To determine the Carbonate, Bicarbonate and Chloride contents in irrigation water.
5. To determine the no. of water molecules of crystallization in Mohr’s salt provided standard
dichromate solution using internal indicator.
6. Determine the amount of Cu in the copper ore solution provided hypo solution.
7. Iodometric Titration of K2Cr2O7 v/s Na2S2O3 to determine the percentage purity of
K2Cr2O7 sample.
8. Argentometric titration one each of Vohlard’s method and of Mohr’s method.
9. Complexometric Titrations.
10. Detrmination of dissolved Oxygen in given sample if water.

Text Books:
1. Vogel’s Textbook of Quantitative Chemical Analysis (Latest ed.), Revised by G.H. Jeffery,
J. Bassett, J. Mendham & R.C. Denney
2. Applied Chemistry: Theory and Practice (Latest ed.), By O.P. Vermani & A.K. Narula

Paper Code: ETCS 155 P C
Paper: Introduction to AutoCAD, Office Automation and Web Design 3 2
List of Experiments
1. Use Microsoft-Word to perform the following:
a) Send out invitation letter to several people using mail merge facility.
b) Create tabular data in word and insert graph to represent data.
c) Create a Macro and use it in an application.
2. Use Microsoft-Excel to perform the following:
a) Create a Macro and use it in an application
b) Enter the name and marks of 10 students and perform various mathematical
functions on it.
c) Enter first quarter performance of five companies and create a pie chart showing
there shareholders in the market.
3. Use Microsoft Power-Point to perform the following
a) Create a slide show on any subject of your choice using minimum five slides.
b) Create slideshow in operating sound.
c) Create an animation using group, ungroup, order, textbox image insert etc.
4. Use HTML to design a Home page for IGIT using all the features of HTML like buttons,
frames, marquee check boxes etc..
5. Use AutoCAD to do the following:
a) Use of Drawing & Editing Properties: Modify Object Properties and a know how
of layers, colors and prototype drawing.
b) Draw line (Poly line, multi line, linear line), polygon, ellipse, circle, arc, rectangle
and use cross hatching, regions, boundary, spline, donut, fillet and extent
commands.
c) Dimensioning commands, styles, control scale factors, drawing set-up, grip editing
objects snaps, utility commands.
d) Projection of points, lines and solids,
e) Section of Solids
f) Development and Intersection of Surface
g) Isomeric Projections

Create a WEB page containing hyperlinks to the pages having information about Science and
Technology.

UNIT I
Materials: Spectrography method for finding composition of materials.
Wood Working Shop: Making of various joints, Pattern making.

UNIT II
Foundary Shop: Bench moulding with single piece pattern and two piece pattern.
Floor moulding – Making of bend pipe mould etc.
Machine moulding – Making of mould using Match-plate pattern.
Core making- Making and baking of dry sand cores for placing in horizontal, vertical and hanging
positions in the mould cavity.
Fitting Shop: Learning use of fitting hand tools, marking tools, marking gauge.
Exercises: Jobs made out of MS Flats, making saw – cut filling V-cut taper at the corners, circular
cut, fitting square in square, triangle in square.

UNIT III
Welding Shop: Electric arc welding, Edge preparations, Exercises making of various joints. Bead
formation in horizontal, vertical and overhead positions.
Gas Welding: Oxy-Acetylene welding and cutting of ferrous metals.
Soldering: Dip soldering.
Brazing: With Oxy-Acetylene gas.

UNIT 4
Sheet Metal Shop: Learning use of sheet-metal tools, Exercises: Making jobs out of GI sheet
metal. Cylindrical, Conical and Prismatic shapes.
 B tech Study Materials for NPTI Exam.pdf (596.3 KB, 32 views)

Last edited by GaganD; June 29th, 2019 at 11:48 AM.
 Other Discussions related to this topic Thread