2019-2020 StudyChaCha

#11
May 16th, 2015, 10:54 PM
 Rakesh ku pradhan Guest Posts: n/a

what types of measurement are there
#12
June 16th, 2015, 06:58 PM
 9386378565 Junior Member Join Date: Jun 2015 Posts: 1
Re: ITI Fitter Objective Type Question Paper

Pls send metal and steel factory ishapore model question
#13
July 21st, 2015, 06:12 PM
 ANKUSH KURMI Guest Posts: n/a

measurment type: (1) linear m. (2) angular m. (3) radial m.
#14
July 31st, 2015, 01:48 AM
 manish vishal Junior Member Join Date: Jul 2015 Posts: 4
send my email id

iti series employblity skill previus qoution peper
#15
August 8th, 2015, 06:00 PM
 Unregistered Guest Posts: n/a

Quote:
 Originally Posted by Unregistered Can you please provide the question paper of ITI Fitter?
which element is used as a semi conductor
#16
September 4th, 2015, 12:20 PM
 હિમાંશૃ Guest Posts: n/a

ડ્રીલનો પોઇંટ એંગલ કોના પર આધારીત છે?
#17
September 26th, 2015, 09:33 PM
 Unregistered Guest Posts: n/a

[QUOTE=Unregistered;608604]Can you please provide the question paper of ITI electrician?
#18
October 16th, 2015, 10:38 PM
 Unregistered Guest Posts: n/a

[QUOTE=Sashwat;609176]List of few questions of ITI Fitter Question paper is given below:

1.A finish cut is given to improve the surface finish of a rough milled workpiece?
A.Decrease cutting speed, feed rate and depth of cut
B.Increase feed rate, depth of cut and reduce cutting speed
C.Increase feed rate, depth of cut and cutting speed
D.Increase cutting speed, reduce feed rate and depth of cut
Ans: D

2.The normal module of a helical gear with real module (m) of 6.62 and having an angle of 25 deg is?
A.6.62 x sin 25 deg
B.6.62 x cos 25 deg
A.6.62 x tan 25 deg
A.6.62 x cot 25 deg
Ans: B

3.Thread ring gauges are used check external threads. Separate 'Go' and 'No Go' gauging members are provided. Which one of the following screw thread elements is not checked with the ring gauges?
A.Pitch
B.Helix angle
C.Profile
D.Pitch diameter
Ans: B

4.Morse taper is one of the internationally accepted standard tapers. The morse taper are available in numbers from?
A.0 to 7
B.0 to 8
C.1 to 7
D.1 to 8
Ans: A

5.A gear wheel has 36 teeth (z) and 3 mm module (m) its pitch diameter cutter?
A.12 mm
B.75 mm
C.80 mm
D.108 mm
Ans: D

6.A main purpose of using worm and worm wheel drives in machines and their accessories is to?
A.Transmit large torque
B.Provide large speed reduction from worm shaft to worm wheel
C.Transmit higher speeds
D.Provide large speed reduction from worm wheel to worm shaft
Ans: B

7.The tooth thickness of rack is measured by?
A.Universal vernier caliper
B.Gear tooth vernier caliper
C.Flange micrometer
D.Gear tester
Ans: B

8.There are two types of milling processes based on the direction of cutter rotation and work feed direction in up cut milling?
A.The work is fed in the same direction as the rotation of the cutter
B.Chip removal starts at the thickness part
C.Machine with backlash eliminator is essential
D.The work is fed against direction of the cutter rotation
Ans: D

9.A Shaft is turned in one finish cut which one of the following parameters will directly influence the machining time?
A.Cutting depth
B.Setting angle
C.Diameter of work piece
D.Tool travel distance
Ans: D

10.In a planning machine the depth of cut is given by?
B.Rotating the feed screw of the tool holder
C.Moving cross slide
D.Lifting the work piece
Ans: B

11.You have to machine a flat surface on a work piece of two metres length. Which machine will you choose for this?
A.Planning
B.Slotting
C.Milling
D.Shaping
Ans: A

12.Why it is necessary to maintain an approach distance between the cutting tool and the work while working on shaping machine?
A.To cool down the cutting edge of the tool bit
B.To avoid any ridger at the end of workpiece
C.To allow the chips to fall and clear the cutting edge
Ans: D

13.Oil grooves are to be cut in brass half bearings. Which one of the following chisels in suitable?
A.Flat chisel
B.Cross chisel
C.Half round nose chisel
D.Web chisel
Ans: C

14.The quality control allows at the most 0.4% defective parts, How many defective parts can be allowed in a production of 500 parts?
A.1
B.2
C.10
D.20
Ans: B

15.One which unit the tool setting is done on NC machine?
A.On special devices away from the machine
B.On the NC machine during idle time
C.On the pre setting devices
D.None of above
Ans: C

16.The component of the surface texture upon which the roughness is superimposed is known as?
A.Surface roughness
B.Surface texture
C.Lay
D.Waviness
Ans: D

17.Which one of the following groups of properties enables the manufacture of chain hooks from wrought iron?
A.Ductillity, malleability and hardness
B.Hardness, toughness and ductility
C.Malleability, ductility and toughness
D.Hardness, toughness and brittleness
Ans: C

18.You have to file an aluminum block to a smooth finish, which one of the following cut of file is most suitable?
A.Double cut
B.Curved cut
C.Rasp cut
D.Single cut
Ans: A

19.Which one of the following is an artificial abrasive?
A.Emery
B.diamond
C.Corundum
D.Silicon carbide
Ans: D

20.The grain size of a grinding wheel is indicated by numbers, which range of grain size referred to as 'Very Fine'?
A.10 - 24
B.30 - 60
C.80 - 180
D.220 - 600
Ans: D

21.A high carbon steel has to be forged, which colour indicate the most suitable forging temperature?
A.Yellow red
B.Dark cherry red
C.white
D.Light yellow
Ans: A

22.The lead screw pitch of a milling machine is 5mm and the dividing head ratio is 40 : 1 the lead of the milling machine is?
A.0.125 mm
B.5 mm
C.8 mm
D.200 mm
Ans: D

23.The axis of the plate cam blank and the end mill spindle should always remain?
A.Inclined to each other
B.Parallel to each other
C.Opposite to each other
D.Vertical and inclined
Ans: B

24.Which milling machine is particularly adopted for milling internal or external profiles?
A.Pantograph milling machine
B.Universal milling machine
C.Planetary milling machine
D.Tracer controlled milling machine
Ans: D

25.A 42 teeth involute helical gear with a helix angle of 45 deg is to be cut on a milling machine?
A.12 to 13
B.35 to 54
C.135 to rake
D.17 to 20
Ans: B

26.CNC machine are not manually operated. They are controlled by means of?
A.A programme
B.An operating
C.A cam
D.A plug board system
Ans: A

27.Counter boring is done for?
A.Deburring hole ends
B.Enlarging holes to accurate size
C.Finishing cored holes
Ans: D

28.A point to point control system is suitable only for one of the following applications?
A.Milling profile
B.Turning
C.Drilling
D.Grinding
Ans: C

29.A steel workpiece of height tensile strength is to be machined with a HSS milling cutter, which one of the following rake angles is best suited for the cutter?
A.8"
B.12"
C.20"
D.28"
Ans: A

30.By using quick return mechanism in shaping machine the cutting stroke moves slow and return stroke fast. what is the ratio between cutting stroke and return stroke?
A.2:3
B.3:2
C.5:3
D.3:5
Ans: B

31.What will be the result if the clearance angle in drill is increased?
A.Poor wedging action
B.Weak cutting edge
C.Rough hole surface
D.Increased point angle
Ans: B

32.An irregularly shaped workpiece is turned on a lathe. which one of the following work holding accessories is used?
A.Three jaw chuck
B.Two jaw chuck
C.Driving plate
D.Face plate
Ans: D

33.Solid H.S.S. cutters and carbide inserted tooth cutters are commonly used for milling, the permissible cutting speed of an inserted tooth cutter in relation to that of a HSS cutter is?
A.Twice as much
B.Five to ten times greater
C.smaller
D.Same
Ans: A

34.It is required to machine a single start worm of 2 module (m) and 60 mm pitch diameter, the speed ration is 40:1, to what length should the worm be cut?
A.21 mm
B.14.6 mm
C.29.3 mm
D.33.3 mm
Ans: C

35.The pattern on the work surface caused by the movement of the cutting tool is called?
A.Waviness
B.Roughness
C.Surface texture
D.Lay
Ans: C

36.A product is said to have the quality when?
A.Its shape and dimensions are within the limits
B.It appears to be very good
C.It is fit for use
D.The choice of material is right
Ans: C

37.Which taper is used on spindle nose of the lathe head stock?
A.Jerno taper
B.Brown and sharp taper
C.Pin taper
D.Morse taper
Ans: D

38.Why do you hold a workpiece lengthwise while machining in a planning machine?
A.It is easier to load workpiece lengthwise
B.The idle time will be minimised
C.The surface quality will be improved
D.The tool life will be increased
Ans: C

39.A hole whose lower deviation is zero is called basic hole, which one of the following letters indicates basic hole?
A. E
B. F
C. G
D. H
Ans: D

40.Rough and finish boring operations are carried out to machine a hole in a milling machine, for rough boring select?
A.High spindle speed and coarse feed
B.slow spindle speed and coarse feed
C.slow spindle speed and fine feed
D.High spindle speed and fine feed
Ans: B

41.While machining cast iron coolant should be?
A.Dry air
B.Kerosence
C.Machine oil
D.soft water
Ans: A

42.The tool post of a planning machine is mounted on?
A.Apron
B.Cross rail
C.Clapper box
Ans: C

43.The tensile strength of a metal is its ability to resist fracture when subjected to tensile loads, the tensile strength of metals are expressed in?
A.N/mm sq.
B.Kg/mm sq.
C.N. Metre
D.Kg. Metre
Ans: B

44.Which one of the characteristics of a milling cutter is most suitable for climb milling?
A.Left hand cutting
B.Teeth material is carbide
C.Larger clearance and rake angle
D.The teeth are straight to the axis of the cutter
Ans:C

45.A gear wheel has 36 teeth and 3 mm module, its pitch diameter is?
A.12 mm
B.75 mm
C.80 mm
D.108 mm
Ans: D

46.Which one of the following thread forms is provided in the threaded parts where the pressure acts on one flank of the threads during transmission?
Ans: D

47.Which one of the bushes used in a drill jig and permits cutting tools of different diameters?
A.Press fit bushes
B.Removable bushes(slip)
C.Fixed removable bushes
D.Liner bushes
Ans: B

48.Which one of the following equipments is used in the shop floor for the checking of the form that is being turned?
A.Template
B.Snap gauge
C.Dial test indicator and slip gauges
D.Tool room microscope
Ans: B

49.While grinding and lapping cemented carbide tipped tool with diamond wheels a good flow of coolant should be directed to cover the grinding zone, the coolant suitable is?
A.Soluable oil
B.Mineral oil
C.Sulphurised oil
D.Mixture of paraffin and water
Ans: A

50.Which one of the following operations can be done on slotting machine?
A.External keyway on long shaft
B.Internal grooves
C.Woodruff keyway on a shaft
D.Keyway for feather keys
Ans: C

51.A screw thread is designated as 1" B.S.P. thread, in 1 inch B.S.P. thread what 1" indicates?
D.Hole diameter of pipe
Ans: D

52.What will be the result if the clearance angle in drill is increased?
A.Poor wedging action
B.Weak cutting edge
C.Rough hole surface
D.Increased point angle
Ans: B

53.The temperature to which a work piece is heated depends on the material and the type of forging process, the temperature range for forging low carbon steel is?
A.700 - 800 deg celsius
B.650 - 920 deg celsius
A.800 - 1300 deg celsius
A.450 - 700 deg celsius
Ans: C

54.It is commonly observed that the face of a grinding wheel becomes shiny and smooth or glazed after some use due to one of the reasons stated below?
A.Grade of wheel is too hard
B.Abrasive
#19
October 22nd, 2015, 07:46 PM
 Unregistered Guest Posts: n/a

Quote:
 Originally Posted by Rakesh ku pradhan what types of measurement are there
There are three type of measurement
Direct
Indirect
Compertive
#20
October 28th, 2015, 04:47 PM
 Unregistered Guest Posts: n/a

yes i want to fitter 3rd semister model paper

Message:
Options

 Forum Jump StudyChaCha Discussion Forum     General Topics     Exams     MBA / Business Schools     Study Abroad and Immigration Consultancy     Career and Jobs Questions by Topics     Medicine and Health     Management

All times are GMT +6.5. The time now is 07:21 PM.

 -- Default Style -- Default vBulletin -- Lightweight MBA Discussion - Job Discussion - Contact Us - StudyChaCha - Blog Archives - Forum Archive - Partners : Management Forum Top