Go Back   2020-2021 StudyChaCha > StudyChaCha Discussion Forum > General Topics





  #2  
Old April 25th, 2014, 06:42 PM
Sashwat's Avatar
Super Moderator
 
Join Date: Jun 2011
Default Re: Questions and Answers for Electronics Devices and Circuits

As you want to get some objective questions and Answers for Electronics Devices and Circuits so here is the information of the same for you:

Some content of the file has bee given here:

1. A vacuum tube has electrodes confined inside an evacuated
(a) glass envelope only (b) metal envelope only
(c) either of (a) and (b) above (d) none of the above
2. In which of the following application vacuum tubes are still being used?
(a) public address system (b) radio receivers
(c) radio transmitters (d) electroplating plants
3. Vacuum tubes in a radio transmitter are used to
(a) provide dc supply (b) generate high power radio waves
(c) record programs (d) provide lighting inside the studio
4. Transistors have not replaced vacuum tubes because
(a) transistors are non-linear
(b) transistors do not have grid
(c) high power transistors are not available
(d) heat dissipation from transistors is difficult
5. Vacuum tubes are still used in some electronic device due to
(a) their long life
(b) their trouble free life
(c) their capacity to handle high power
(d) their better reliability
6. The emission of electrons in a vacuum diode is achieved by
(a) electrostatic field (b) magnetic field
(c) heating (d) electron bombardment
7. At ordinary temperatures, energy of free electrons in metals as compared with work function is
(a) more (b) less
(c) equal (d) none of the above
8. The energy can be provided to electrons to cross the surface barrier by
(a) heating (b) electric field
(c) light (d) any of the above
9. The principle of emission of electrons from a metal surface, under the influence of light is known as
(a) photo electric emission (b) seebeck effect
(c) secondary emission (d) none of the above
10. With an indirectly heated cathode, the heater voltage
(a) must be a steady dc voltage (b) is applied to the cathode
(c) is separate from the cathode circuit
(d) none of the above
11. Secondary emission of electrons occurs when the metal surface is
(a) cooled to very low temperatures (b) heated
(c) subjected to electric as well as magnetic field
(d) bombardment with high energy electrons
12. The filament of a vacuum tube can be heated by
(a) dc voltage only (b) low frequency ac voltage
(c) rectified dc voltage (d) any of the above
13. The work function for the oxide coated emitter material is
(a) 1.0 eV (b) 2.63 eV
(c) 3.98 eV (d) 4.52 eV
14. The work function of pure tungsten is
(a) 1.5 eV (b) 2.5 eV
(c) 8.5 eV (d) 4.5 eV
15. Oxide coated cathodes are used for the tubes
(a) designed to handle small power
(b) designed to handle large power
(c) used in radio transmitters
(d) none of the above
16. The emission efficiency of a cathode is
(a) emission current/volt
(b) emission current/0C
(c) emission current/W
(d) emission current/electron density
17. A directly heated cathode may be made of
(a) tungsten
(b) thoriated tungsten
(c) tungsten coated with strontium oxide
(d) any of the above
18. In case of indirectly heated tubes the heater filament is usually made of
(a) manganin (b) tungsten
(c) invar (d) any of the above
19. The anode material is usually
(a) nickel (b) carbon
(c) copper (d) aluminium
20. Fins are often provided on
(a) heater filament (b) cathode
(c) anode (d) all of the above
21. In triodes, the grid is made in the form of
(a) single filament wire (b) metal strip
(c) mesh (d) metallic cylinder
22. In a troide, the third electrode is kept
(a) near the cathode (b) near the anode
(c) exactly in between cathode and anode
(d) anywhere between cathode and anode
23. Which of the following vacuum tube cannot be used as an amplifier?
(a) Diode (b) Triode
(c) Tetrode (d) Pentode
24. The process by which impurities are added to a pure semi-conductor is
(a) Diffusing (b) Drift
(c) Doping (d) Mixing
25. Which of the following is a passive component?
(a) Semi-conductor device (b) Vacuum tube device
(c) Capacitors (d) All of the above
26. A Germanium atom contains
(a) Two electron orbits (b) Three valence electrons
(c) Four protons (d) Four valance electron
27. The type of atomic bonding most common in semi-conductor is
(a) Metallic (b) Ionic
(c) Covalent (d) Chemical
28. When at atom either gains or loses an electron it is said to be
(a) Ionized (b) Bonded
(c) Excited (d) Stablised (e) An acceptor
29. The diameter of an atom is
(a) 10-6 metre (b) 10-10 metre
(c) 10-15 metre (d) 10-21 metre
30. The atomic weight of an atom is determined by
(a) The number of protons
(b) The number of neutrons
(c) The number of protons and neutrons
(d) The number of electrons and protons
31. The constituents of an atoms are
I. Protons II. Neutrons
III. Electrons IV. Positron
The mass of which two constituents is nearly the same?
(a) I and II only (b) II and III only
(c) I and III only (d) II and IV only
32. The number of protons in an atom is called its
(a) isotope number (b) atomic number
(c) atomic weight (d) none of the above
33. The maximum number of electrons in third orbit can be
(a) 3 (b) 6
(c) 12 (d) 18
34. Valence electrons are the
(a) loosely packed electrons (b) mobile electrons
(c) electrons present in the outermost orbit
(d) electrons that of not carry any charge
35. Which of the following element has lowest atomic number?
(a) B (b) Al
(c) Ga (d) In
36. Which of the following element has four valence electrons?
(a) Silicon (b) Germanium
(c) Both (a) and (b) above (d) None of the above
37. Which of the following element has four valance electrons?
(a) Silicon (b) Antimony
(c) Phosphorous (d) Boron
38. The forbidden energy gap for germanium is
(a) 0.12 eV (b) 0.32 eV
(c) 0.72 eV d) 0.92 eV
39. Free electrons exist in
(a) First band (b) Second band
(c) Third band (d) Conduction band
40. The advantage of transistor over vacuum tube is
(a) no heat is required
(b) small size and light in weight
(c) very low power consumption
(d) all of the above
41. A collector collects
(a) electrons from the base in case of PNP transistor
(b) electrons from the emitter in case PNP transistor
(c) holes from the base in case of NPN transistor
(d) holes from the base in case of PNP transistor
42. A PNP transistor is made of
(a) Silicon (b) Germanium
(c) Either silicon or germanium (d) None of the above
43. A transistor which of the following region is very lightly doped and is very thin?
(a) Emitter (b) Base
(c) Collector (d) None of the above
44. In a PNP transistor, with normal bias, the emitter junction
(a) is always reverse biased (b) offers very high resistance
(c) offers a low resistance (d) remains open
45. In a NPN transistor, when emitter junction is forward biased and collector junction is reverse biased, the transistor will operate in
(a) active region (b) saturation region
(c) cut off region (d) inverted region
46. In a PNP transistor, electrons flow
(a) into the transistor at the collector only
(b) into the transistor at the base and the collector leads
(c) out of the transistor at base, and collector leads
(d) out of the transistor at base collector as well as emitter leads
47. A transistor may fail due to
(a) open weld at the wire leads to the semiconductor
(b) short circuit caused by momentary overloads
(c) overheating due to circuit failures
(d) any of the above
48. Arrow head on a transistor symbol indicates
(a) Direction of electron current in emitter
(b) direction of hole current in emitter
(c) different current in emitter
(d) drift current in emitter
49. The heat sink disposes off heat mainly by
(a) radiation (b) natural convection
(c) forced convection (d) conduction
50. A transistor has
I. Collector
II. Emitter
III. Base
In a PNP transistor the electron flow into the transistor at
(a) I only (b) II only
(c) II and III only (d) I and III only

51. A diac is a semi-conductor device which acts as a
(a) 2 terminal unidirectional switch
(b) 2 terminal bidirectional switch
(c) 3 terminal bidirectional switch
(d) 4 terminal multi-directional switch
52. A triac is a semi-conductor device which acts as a
(a) 2 terminal unidirectional switch
(b) 2 terminal bidirectional switch
(c) 3 terminal bidirectional switch
(d) 4 terminal multi-directional switch
53. The input and output signals for CE amplifier are always
(a) equal (b) inphase
(c) out of phase (d) complementary to each other
54. Common emitter transistor has
(a) high current and high voltage gain
(b) low current gain and low voltage gain
(c) high current gain and low voltage gain
(d) low current and voltage gain
55. Which of the following is not provided in a PNP transistor?
(a) Base (b) Collector
(c) Emitter (d) Heater
56. A dc amplifiers
(a) dc only (b) ac only
(c) both ac and dc (d) neither of the above
57. Which of the following device acts as an NPN and a PNP transistor connected base to base and emitter to collector?
(a) UJT (b) SCR
(c) Diac (d) Triac
58. Which of the following is the fastest switching device?
(a) JFET (b) BJT
(c) MOSFET (d) Triode
59. An amplifier should have
(a) high fidelity (b) low noise
(c) stable operation (d) all of the above
60. FET has
a) high input impedance b ) low input impedance
c) high output impedance d) both a and c
61. The biasing of JFET/MOSFET can be done by using
a)self-bias b)forward bias c)either a or b d)none.
62. The value for lattice constant for silicon equals to:
a)5.43*10+11 b)5.43*10-9 c)5.43*10-10 d)5.43*10-15
63. Common mode rejection ratio equals
a)adm/acm b)acm/adm c)adm/ac d)none.
64.An ideal diode conducts abruptly for
a)Vd>0 b)Vd<0 c)Vd=0 d)none
65.The area depleted of charge carrier and having only ions is called
a)space charge region b)transistion region c)both a&b d)none
66.A clamping circuit is also called as
a)DC adder b)DC subtractor c)both a&c d)dc restorer
67. The peak inverse voltage of full wave rectifier is
a)V¬¬max b)2Vmax c)Vmax/2 d)2Vmin
68. A rectifier can be called as
a)amplitude detector b)signal detector c)neither a nor b d)either a or b.
69. A BJT is a:
a) current controlled current device b)voltage controlled current device c) voltage controlled voltage device d)either a or b
70. MOSFET input resistance is typically of the order
a)1010-1015Ω b) 1010-1012Ω c) 1010-1021Ω d)none
71.JFET is a
a) voltage controlled voltage device b)voltage controlled current device c) current controlled voltage device d)either a or b
72.What is ripple factor?
a) ripple voltage/dc voltage b) Vrms/Vdc c)Irms/Idc d)any of the above
73.the depletion region is an open circuited PN junction contain
a)electrons b)holes c)uncovered immobile impurity ions d)none.
74.the dynamic response R of a diode varies as
a)1/I b)1/I2 c)I d)I2.
75. Cut in voltage of silicon is approximately
a) 0.2 b) 0.6 c) 1.1 d) any other value..
76. The reverse saturation current Io fo r a silicon diode varies
a) T3 b) T1.5 c) T2 d) 2T where T is temp
77.The product of diffusion capacitance CD and dynamic resistance of a diode is equal to
a)τ2 b)τ c) 1/τ d)any other quantity Where τ is the lifetime of minority carriers
78. Fermi level represents the energy level with probability of it’s operation
a) 0 b) 50% c) 100% d) 25%
79. At 0 k all the quantum states with energy less than fermilevel ef are occupied
a)true b)false
80. Intrinsic concentration of charge carriers in a semi conductor varies as
a) T b)T2 c)T3 d)t-3
81. The diffusion current is directly proportional to
a)applied electric field b)concentration radient of charge carrier c)square of applied electric field d)square root of applied ele.field.
82. The ratio of diffusion for holes to mobility for holes is proportional to
a) T b)T² c)1/T d)independent of T ,here T is temperature
83. Light falls on one end of the long open circuited n-type semiconductor from far low level injection the hole ct is due predominantly to
a)drift b)diffusion c)either a or b d)length of the bar
84.Forward transconductance Gfs=
a) ΔVds/ΔId b) ΔVgs/ΔVds c) ΔId/ΔVgs d) ΔVgs/ΔId.
85.MOSFET is said to be operate in depletion mode when
a) ΔVgs>0 b) ΔVgs<=0 c) ΔVgs=0 d) none .
86.When does the electric field become strong enough to pull free electrons to the layer under the insulator
a) ΔVgs<= ΔVt b) ΔVgs>= ΔVt c) ΔVgs>ΔVt d)none.
87.which one of the following is a compound semi conductor
a)GaAs b)GaSi c)Nacl d)none.
88.In pnp transistor,on reaching the collector junction potential behavior falls down a)true b) false
89.Transistor α approaches unity when
a)σb/ σe>1 b) σb/ σe<1 c) σb/ σe=1 d)none
90.As the magnitude of reverse detector junction voltage increase the effective bias width a)increases b)decreases c)remains unaffected d) none
91.Lateral pnp integrated transistor has current gain
a) lower than b) higher than
c)of the same order as the conventional pnp transistor
d)of the same order as the conventional npn
92.Epitaxial growth involves chemical reaction a)yes b)no
93. FET has offset voltage of about
a)0.2v b)0.6v c)1.1v d)0v
94.The concentration of minority carriers at JC in the base region of pnp transistor operating in the active region
a)0 b)thermal equilibrium value p c)same as the value of Jed)none
95.As the semiconductor photodiode
a)photoconductive effect b) photo emissive effect c) photovoltaic effect d)none
96.In a tunnel diode ,width of depletion region is of the order of
a)100 amstrong units b)0.1 microns c)1 microns d)12.3 microns
97.Transferred electron bulk effect takes place in
a)ge-arsenide b) silicon c) ge d) none
98.In tunnel diode impurity concentration of the order of
a)1 in 10^8 b) 1 in 10^5
c) 1 in 10^3 d) 1 in 10
99.The other name for the MOSFET is
a)IGFET b)IGMOSFET c)IGJFET d)NONE
100.FET have higher input impedence than BJT’s
a)true b)false
101.In an FET transconductance gm is propotional to
a)IDS b)IDS^2 c)sq.root of IDS d)1/IDS
102.In a JFET ,dynamic drain resistance rd is of the order of
a)1k b)10k c)100k d)10mΩ
103.Input resistance of FET common source amp in its low frequency small signal operation is
a)very small b)medium c)high d)almost infinite
104.The current gain of the transistor amplifier is lowest in
a)CB configuration b)CE c)CC d) none
105.Input resistances of ideal voltage amplifier & ideal current amplifier are a)∞,0 b)0, ∞ c) ∞,∞ d)0,0
106.Stability factor in fixed bias CE amplifier is given by
a)β b) β+1 c)1/ β+1 d)1/ β
107. In half wave rectifier,the lowest ripple frequency is
a)f/2 b)f c)2f d)3f
108.In a full wave rectifier the lowest ripple frequency is
a)f/2 b) f c) 2f d) 3f
__________________
Answered By StudyChaCha Member
Reply With Quote
Reply


Reply to this Question / Ask Another Question
Your Username: Click here to log in

Message:
Options



All times are GMT +6.5. The time now is 08:09 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0 PL2

1 2 3 4 5 6 7 8