Go Back   2018-2019 StudyChaCha > StudyChaCha Discussion Forum > General Topics




  #1  
Old January 9th, 2014, 03:10 PM
Unregistered
Guest
 
Posts: n/a
Default Capgemini Placement Aptitude Question Paper

Would you please provide here the Capgemini placement aptitude question paper?
Reply With Quote Quick reply to this message
Other Discussions related to this topic
Thread
Syntel Placement Aptitude Question Paper
Paper For Accenture Placement Aptitude Test
L&T Placement Aptitude Test Question Paper
CAPGEMINI placement test paper pattern
Infosys Aptitude and Verbal Reasoning Placement Paper
CAPGEMINI Aptitude Test Papers
Aptitude Test Question Paper for Infosys Placement
CAPGEMINI Placement Papers
Aptitude Question Paper for PATNI Placement
Patni Placement Aptitude Question Paper
CAPGEMINI Model question paper
Zensar Technologies Placement Paper of Aptitude Test
Patni Placement Aptitude Test Question Paper
Capgemini Aptitude Test Papers
Capgemini Placement Papers
Aptitude Question Paper for Tech Mahindra Placement
Question Paper for Placement Aptitude Exam
Zensar Placement Aptitude Question Paper
TCS Placement Aptitude Question Paper
TCS Aptitude Placement Paper






  #2  
Old January 10th, 2014, 11:23 AM
Super Moderator
 
Join Date: Jun 2013
Posts: 42,978
Default Re: Capgemini Placement Aptitude Question Paper

This is the Capgemini placement aptitude questions:

1. A rectangular tank can hold k liters of water. How many liters of water can a tank with all its dimensions double that of the first one hold?

A. 2k liters

B. 23 liters

C. 4k liters

D. 6k liters

2. A triangle has sides of lengths 10, 24 and n, where n is a positive n is a positive integer. The number of values of n for which this triangle has three acute angles is

A. 1

B. 2

C. 3

D. 4

3. In the rectangle ABCD, the perpendicular bisector of AC divides the longer side AB in a ratio
2: 1. Then the angle between AC and BD is

A. 30o

B. 45o

C. 60o

D. 90o

4. A sphere of 10.5 cm radius is melted and cast into a cuboid of maximum volume. The total surface area of such cuboid is approximately:

A. 1720

B. 1650

C. 1810

D. 1932

5. Consider a right angle triangle where the length of the shorter leg is one third of the length of its hypotenuse. If the length of the shorter leg is 7 cm, then calculate the area of the triangle in square cm.

A. 7 * square root of 2

B. 49 * square root of 2

C. 14 * square root of 2

D. 49

6. Suppose that a train journey is being charged as below:
-- Minimum ticket cost is Rs. 100, which entitles the ticket holder to travel up to a distance of 10 miles
--For every additional mile traveled, the charge is Rs. 10
--A minimum luggage weight of 10 kg is not charged, after which it is charged at Rs. 1 per kg.
During a specific journey, suppose you carry a weight of 'n' kg, and a distance of 'm' miles is traveled, which equation will indicate the correct total charge to be paid by you?

A. 100 + (10 * (m-10)) + n

B. 100 - (10 * m) + (n-10)

C. 100 + (10 * (m-10)) + (n-10)

D. 100 - (10 * (m+10)) + (n-10)

7. There are two queues at a supermarket billing counter. In the first queue there are m1 customers all with n1 items in their baskets, while in the second queue there are m2 customers all with n2 items in their baskets. It takes t seconds to process each item and p seconds for each person to pay. A customer wishes to know which queue to join.
Which one of these options gives the condition for the first queue to be the better queue to join?

A. m1(p+n1t) = m2(p+n2t)

B. m1(p+n1t)
C. m2(p+n2t) = m1(p+n1t)

D. m1(p+n1t) = m2(p+n2t)

8. Take a bicycle with following specifications:

--The front de-railer is on the 52 tooth gear and the rear de-railer is on the 14 tooth gear
--The rear gear has 14 teeth
--The diameter of the rear wheel is 27"

If a bicyclist pedals at 75 revolutions per minute, then what will be the speed achieved?

A. 22.38

B. 26.85

C. 25

D. 30

9. Suppose Mr. X works for company A. The company grants 1000 shares to Mr. X in 2008. At that point each share is worth Rs. 100. In 2010, he decides to sell his entire stake and at that point, the value is Rs. 120 per share. The government declares that the tax to be paid is 10% of the entire profit. Due to the inflation, the value of a rupee in 2010 is equivalent to 0.8 of a rupee in 2008. In this scenario, which of the following model indicates the actual tax to be paid by the investor?

A. 120 Rs at 2010 value " 100 Rs at 2008 value

B. 120 Rs at 2010 value " 100 Rs at 2008 value (1 Re at 2010 value / 0.8 Re at 2008 value)

C. 120 Rs at 2008 value " 100 Rs at 2010 value 1 Re at 2008 value / 0.9 Re at 2010 value)

D. 100 Rs at 2010 value " 120 Rs at 2008 value (1 Re at 2010 value / 0.8 Re at 2008 value)

For detailed paper here is attachment:
__________________
Answered By StudyChaCha Member
Reply With Quote Quick reply to this message
Our Latest Videos
Sponsored Links






















  #3  
Old July 12th, 2014, 01:55 PM
Junior Member
 
Join Date: Jul 2014
Posts: 1
Default Re: Capgemini Placement Aptitude Question Paper

i wanted huawei aptitude and java papers
Reply With Quote Quick reply to this message
Reply


Reply to this Question / Ask Another Question
Your Username: Click here to log in

Message:
Options

Forum Jump


All times are GMT +6.5. The time now is 05:43 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Search Engine Friendly URLs by vBSEO 3.6.0 PL2

1 2 3 4 5 6 7 8 9