#1
 
 
Gate question papers with solutions for EEE
Would you provide me the GATE questions papers for EEE?

#2
 
 
Re: Gate question papers with solutions for EEE
Here I am giving some previous questions for GATE exam of Electrical Engineering: Complete the sentence: Dare _______________ mistakes. (A) commit (B) to commit (C) committed (D) committing Choose the grammatically CORRECT sentence: (A) Two and two add four. (B) Two and two become four. (C) Two and two are four. (D) Two and two make four. A singlephase load is supplied by a singlephase voltage source. If the current flowing from the load to the source is 0 10 150 Ð A and if the voltage at the load terminals is 0 100 60 Ð V, then the (A) load absorbs real power and delivers reactive power. (B) load absorbs real power and absorbs reactive power. (C) load delivers real power and delivers reactive power. (D) load delivers real power and absorbs reactive power. A singlephase transformer has noload loss of 64 W, as obtained from an opencircuit test. When a shortcircuit test is performed on it with 90% of the rated currents flowing in its both LV and HV windings, the measured loss is 81 W. The transformer has maximum efficiency when operated at (A) 50.0% of the rated current. (B) 64.0% of the rated current. (C) 80.0% of the rated current. (D) 88.8% of the rated current. The flux density at a point in space is given by 4 2 8 x ky = + + x y z B a a a Wb/m2. The value of constant k must be equal to (A) –2 (B) –0.5 (C) +0.5 (D) +2 A continuous random variable X has a probability density function , ) ( x e x f  = ¥ < < x 0 . Then } 1 { > X P is (A) 0.368 (B) 0.5 (C) 0.632 (D) 1.0 A bulb in a staircase has two switches, one switch being at the ground floor and the other one at the first floor. The bulb can be turned ON and also can be turned OFF by any one of the switches irrespective of the state of the other switch. The logic of switching of the bulb resembles (A) an AND gate (B) an OR gate (C) an XOR gate (D) a NAND gate A bandlimited signal with a maximum frequency of 5 kHz is to be sampled. According to the sampling theorem, the sampling frequency in kHz which is not valid is (A) 5 (B) 12 (C) 15 (D) 20 Leakage flux in an induction motor is (A) flux that leaks through the machine (B) flux that links both stator and rotor windings (C) flux that links none of the windings (D) flux that links the stator winding or the rotor winding but not both For more questions here I am attaching a file 